/mandos/trunk

To get this branch, use:
bzr branch http://bzr.recompile.se/loggerhead/mandos/trunk

« back to all changes in this revision

Viewing changes to mandos.xml

  • Committer: Teddy Hogeborn
  • Date: 2019-02-09 23:23:26 UTC
  • Revision ID: teddy@recompile.se-20190209232326-z1z2kzpgfixz7iaj
Add support for using raw public keys in TLS (RFC 7250)

Since GnuTLS removed support for OpenPGP keys in TLS (RFC 6091), and
no other library supports it, we have to change the protocol to use
something else.  We choose to use "raw public keys" (RFC 7250).  Since
we still use OpenPGP keys to decrypt the secret password, this means
that each client will have two keys: One OpenPGP key and one TLS
public/private key, and the key ID of the latter key is used to
identify clients instead of the fingerprint of the OpenPGP key.

Note that this code is still compatible with GnuTLS before version
3.6.0 (when OpenPGP key support was removed).  This commit merely adds
support for using raw pulic keys instead with GnuTLS 3.6.6. or later.

* DBUS-API (Signals/ClientNotFound): Change name of first parameter
                                     from "Fingerprint" to "KeyID".
  (Mandos Client Interface/Properties/KeyID): New.
* INSTALL: Document conflict with GnuTLS 3.6.0 (which removed OpenPGP
           key support) up until 3.6.6, when support for raw public
           keys was added.  Also document new dependency of client on
           "gnutls-bin" package (for certtool).
* Makefile (run-client): Depend on TLS key files, and also pass them
                         as arguments to client.
  (keydir/tls-privkey.pem, keydir/tls-pubkey.pem): New.
  (confdir/clients.conf): Add dependency on TLS public key.
  (purge-client): Add removal of TLS key files.
* clients.conf ([foo]/key_id, [bar]/key_id): New.
* debian/control (Source: mandos/Build-Depends): Also allow
                                                 libgnutls30 (>= 3.6.6)
  (Package: mandos/Depends): - '' -
  (Package: mandos/Description): Alter description to match new
                                 design.
  (Package: mandos-client/Description): - '' -
  (Package: mandos-client/Depends): Move "gnutls-bin | openssl" to
                                    here from "Recommends".
* debian/mandos-client.README.Debian: Add --tls-privkey and
                                      --tls-pubkey options to test
                                      command.
* debian/mandos-client.postinst (create_key): Renamed to "create_keys"
                                             (all callers changed),
                                             and also create TLS key.
* debian/mandos-client.postrm (purge): Also remove TLS key files.
* intro.xml (DESCRIPTION): Describe new dual-key design.
* mandos (GnuTLS): Define different functions depending on whether
                   support for raw public keys is detected.
  (Client.key_id): New attribute.
  (ClientDBus.KeyID_dbus_property): New method.
  (ProxyClient.__init__): Take new "key_id" parameter.
  (ClientHandler.handle): Use key IDs when using raw public keys and
                          use fingerprints when using OpenPGP keys.
  (ClientHandler.peer_certificate): Also handle raw public keys.
  (ClientHandler.key_id): New.
  (MandosServer.handle_ipc): Pass key ID over the pipe IPC.  Also
                             check for key ID matches when looking up
                             clients.
  (main): Default GnuTLS priority string depends on whether we are
          using raw public keys or not.  When unpickling clients, set
          key_id if not set in the pickle.
  (main/MandosDBusService.ClientNotFound): Change name of first
                                           parameter from
                                           "Fingerprint" to "KeyID".
* mandos-clients.conf.xml (OPTIONS): Document new "key_id" option.
  (OPTIONS/secret): Mention new key ID matchning.
  (EXPANSION/RUNTIME EXPANSION): Add new "key_id" option.
  (EXAMPLE): - '' -
* mandos-ctl (tablewords, main/keywords): Add new "KeyID" property.
* mandos-keygen: Create TLS key files.  New "--tls-keytype" (-T)
                 option.  Alter help text to be more clear about key
                 types.  When in password mode, also output "key_id"
                 option.
* mandos-keygen.xml (SYNOPSIS): Add new "--tls-keytype" (-T) option.
  (DESCRIPTION): Alter to match new dual-key design.
  (OVERVIEW): - '' -
  (FILES): Add TLS key files.
* mandos-options.xml (priority): Document new default priority string
                                 when using raw public keys.
* mandos.xml (NETWORK PROTOCOL): Describe new protocol using key ID.
  (BUGS): Remove issue about checking expire times of OpenPGP keys,
          since TLS public keys do not have expiration times.
  (SECURITY/CLIENT): Alter description to match new design.
  (SEE ALSO/GnuTLS): - '' -
  (SEE ALSO): Add reference to RFC 7250, and alter description of when
              RFC 6091 is used.
* overview.xml: Alter text to match new design.
* plugin-runner.xml (EXAMPLE): Add --tls-pubkey and --tls-privkey
                               options to mandos-client options.
* plugins.d/mandos-client.c: Use raw public keys when compiling with
                             supporting GnuTLS versions. Add new
                             "--tls-pubkey" and "--tls-privkey"
                             options (which do nothing if GnuTLS
                             library does not support raw public
                             keys).  Alter text throughout to reflect
                             new design.  Only generate new DH
                             parameters (based on size of OpenPGP key)
                             when using OpenPGP in TLS.  Default
                             GnuTLS priority string depends on whether
                             we are using raw public keys or not.
* plugins.d/mandos-client.xml (SYNOPSIS): Add new "--tls-privkey" (-t)
                                          and "--tls-pubkey" (-T)
                                          options.
  (DESCRIPTION): Describe new dual-key design.
  (OPTIONS): Document new "--tls-privkey" (-t) and "--tls-pubkey" (-T)
             options.
  (OPTIONS/--dh-bits): No longer necessarily depends on OpenPGP key
                       size.
  (FILES): Add default locations for TLS public and private key files.
  (EXAMPLE): Use new --tls-pubkey and --tls-privkey options.
  (SECURITY): Alter wording slightly to reflect new dual-key design.
  (SEE ALSO/GnuTLS): Alter description to match new design.
  (SEE ALSO): Add reference to RFC 7250, and alter description of when
              RFC 6091 is used.

Show diffs side-by-side

added added

removed removed

Lines of Context:
2
2
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
3
3
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
4
4
<!ENTITY COMMANDNAME "mandos">
5
 
<!ENTITY TIMESTAMP "2009-09-17">
 
5
<!ENTITY TIMESTAMP "2019-02-09">
6
6
<!ENTITY % common SYSTEM "common.ent">
7
7
%common;
8
8
]>
19
19
        <firstname>Björn</firstname>
20
20
        <surname>Påhlsson</surname>
21
21
        <address>
22
 
          <email>belorn@fukt.bsnet.se</email>
 
22
          <email>belorn@recompile.se</email>
23
23
        </address>
24
24
      </author>
25
25
      <author>
26
26
        <firstname>Teddy</firstname>
27
27
        <surname>Hogeborn</surname>
28
28
        <address>
29
 
          <email>teddy@fukt.bsnet.se</email>
 
29
          <email>teddy@recompile.se</email>
30
30
        </address>
31
31
      </author>
32
32
    </authorgroup>
33
33
    <copyright>
34
34
      <year>2008</year>
35
35
      <year>2009</year>
 
36
      <year>2010</year>
 
37
      <year>2011</year>
 
38
      <year>2012</year>
 
39
      <year>2013</year>
 
40
      <year>2014</year>
 
41
      <year>2015</year>
 
42
      <year>2016</year>
 
43
      <year>2017</year>
 
44
      <year>2018</year>
36
45
      <holder>Teddy Hogeborn</holder>
37
46
      <holder>Björn Påhlsson</holder>
38
47
    </copyright>
86
95
      <sbr/>
87
96
      <arg><option>--debug</option></arg>
88
97
      <sbr/>
 
98
      <arg><option>--debuglevel
 
99
      <replaceable>LEVEL</replaceable></option></arg>
 
100
      <sbr/>
 
101
      <arg><option>--no-dbus</option></arg>
 
102
      <sbr/>
89
103
      <arg><option>--no-ipv6</option></arg>
 
104
      <sbr/>
 
105
      <arg><option>--no-restore</option></arg>
 
106
      <sbr/>
 
107
      <arg><option>--statedir
 
108
      <replaceable>DIRECTORY</replaceable></option></arg>
 
109
      <sbr/>
 
110
      <arg><option>--socket
 
111
      <replaceable>FD</replaceable></option></arg>
 
112
      <sbr/>
 
113
      <arg><option>--foreground</option></arg>
 
114
      <sbr/>
 
115
      <arg><option>--no-zeroconf</option></arg>
90
116
    </cmdsynopsis>
91
117
    <cmdsynopsis>
92
118
      <command>&COMMANDNAME;</command>
110
136
    <para>
111
137
      <command>&COMMANDNAME;</command> is a server daemon which
112
138
      handles incoming request for passwords for a pre-defined list of
113
 
      client host computers.  The Mandos server uses Zeroconf to
114
 
      announce itself on the local network, and uses TLS to
115
 
      communicate securely with and to authenticate the clients.  The
116
 
      Mandos server uses IPv6 to allow Mandos clients to use IPv6
117
 
      link-local addresses, since the clients will probably not have
118
 
      any other addresses configured (see <xref linkend="overview"/>).
119
 
      Any authenticated client is then given the stored pre-encrypted
120
 
      password for that specific client.
 
139
      client host computers. For an introduction, see
 
140
      <citerefentry><refentrytitle>intro</refentrytitle>
 
141
      <manvolnum>8mandos</manvolnum></citerefentry>. The Mandos server
 
142
      uses Zeroconf to announce itself on the local network, and uses
 
143
      TLS to communicate securely with and to authenticate the
 
144
      clients.  The Mandos server uses IPv6 to allow Mandos clients to
 
145
      use IPv6 link-local addresses, since the clients will probably
 
146
      not have any other addresses configured (see <xref
 
147
      linkend="overview"/>).  Any authenticated client is then given
 
148
      the stored pre-encrypted password for that specific client.
121
149
    </para>
122
150
  </refsect1>
123
151
  
192
220
      </varlistentry>
193
221
      
194
222
      <varlistentry>
 
223
        <term><option>--debuglevel
 
224
        <replaceable>LEVEL</replaceable></option></term>
 
225
        <listitem>
 
226
          <para>
 
227
            Set the debugging log level.
 
228
            <replaceable>LEVEL</replaceable> is a string, one of
 
229
            <quote><literal>CRITICAL</literal></quote>,
 
230
            <quote><literal>ERROR</literal></quote>,
 
231
            <quote><literal>WARNING</literal></quote>,
 
232
            <quote><literal>INFO</literal></quote>, or
 
233
            <quote><literal>DEBUG</literal></quote>, in order of
 
234
            increasing verbosity.  The default level is
 
235
            <quote><literal>WARNING</literal></quote>.
 
236
          </para>
 
237
        </listitem>
 
238
      </varlistentry>
 
239
      
 
240
      <varlistentry>
195
241
        <term><option>--priority <replaceable>
196
242
        PRIORITY</replaceable></option></term>
197
243
        <listitem>
233
279
      </varlistentry>
234
280
      
235
281
      <varlistentry>
 
282
        <term><option>--no-dbus</option></term>
 
283
        <listitem>
 
284
          <xi:include href="mandos-options.xml" xpointer="dbus"/>
 
285
          <para>
 
286
            See also <xref linkend="dbus_interface"/>.
 
287
          </para>
 
288
        </listitem>
 
289
      </varlistentry>
 
290
      
 
291
      <varlistentry>
236
292
        <term><option>--no-ipv6</option></term>
237
293
        <listitem>
238
294
          <xi:include href="mandos-options.xml" xpointer="ipv6"/>
239
295
        </listitem>
240
296
      </varlistentry>
 
297
      
 
298
      <varlistentry>
 
299
        <term><option>--no-restore</option></term>
 
300
        <listitem>
 
301
          <xi:include href="mandos-options.xml" xpointer="restore"/>
 
302
          <para>
 
303
            See also <xref linkend="persistent_state"/>.
 
304
          </para>
 
305
        </listitem>
 
306
      </varlistentry>
 
307
      
 
308
      <varlistentry>
 
309
        <term><option>--statedir
 
310
        <replaceable>DIRECTORY</replaceable></option></term>
 
311
        <listitem>
 
312
          <xi:include href="mandos-options.xml" xpointer="statedir"/>
 
313
        </listitem>
 
314
      </varlistentry>
 
315
      
 
316
      <varlistentry>
 
317
        <term><option>--socket
 
318
        <replaceable>FD</replaceable></option></term>
 
319
        <listitem>
 
320
          <xi:include href="mandos-options.xml" xpointer="socket"/>
 
321
        </listitem>
 
322
      </varlistentry>
 
323
      
 
324
      <varlistentry>
 
325
        <term><option>--foreground</option></term>
 
326
        <listitem>
 
327
          <xi:include href="mandos-options.xml"
 
328
                      xpointer="foreground"/>
 
329
        </listitem>
 
330
      </varlistentry>
 
331
      
 
332
      <varlistentry>
 
333
        <term><option>--no-zeroconf</option></term>
 
334
        <listitem>
 
335
          <xi:include href="mandos-options.xml" xpointer="zeroconf"/>
 
336
        </listitem>
 
337
      </varlistentry>
 
338
      
241
339
    </variablelist>
242
340
  </refsect1>
243
341
  
263
361
      start a TLS protocol handshake with a slight quirk: the Mandos
264
362
      server program acts as a TLS <quote>client</quote> while the
265
363
      connecting Mandos client acts as a TLS <quote>server</quote>.
266
 
      The Mandos client must supply an OpenPGP certificate, and the
267
 
      fingerprint of this certificate is used by the Mandos server to
268
 
      look up (in a list read from <filename>clients.conf</filename>
269
 
      at start time) which binary blob to give the client.  No other
270
 
      authentication or authorization is done by the server.
 
364
      The Mandos client must supply a TLS public key, and the key ID
 
365
      of this public key is used by the Mandos server to look up (in a
 
366
      list read from <filename>clients.conf</filename> at start time)
 
367
      which binary blob to give the client.  No other authentication
 
368
      or authorization is done by the server.
271
369
    </para>
272
370
    <table>
273
371
      <title>Mandos Protocol (Version 1)</title><tgroup cols="3"><thead>
293
391
        </emphasis></entry>
294
392
      </row>
295
393
      <row>
296
 
        <entry>OpenPGP public key (part of TLS handshake)</entry>
 
394
        <entry>Public key (part of TLS handshake)</entry>
297
395
        <entry>-><!-- &rarr; --></entry>
298
396
      </row>
299
397
      <row>
317
415
      for some time, the client is assumed to be compromised and is no
318
416
      longer eligible to receive the encrypted password.  (Manual
319
417
      intervention is required to re-enable a client.)  The timeout,
320
 
      checker program, and interval between checks can be configured
321
 
      both globally and per client; see <citerefentry>
 
418
      extended timeout, checker program, and interval between checks
 
419
      can be configured both globally and per client; see
 
420
      <citerefentry><refentrytitle>mandos-clients.conf</refentrytitle>
 
421
      <manvolnum>5</manvolnum></citerefentry>.
 
422
    </para>
 
423
  </refsect1>
 
424
  
 
425
  <refsect1 id="approval">
 
426
    <title>APPROVAL</title>
 
427
    <para>
 
428
      The server can be configured to require manual approval for a
 
429
      client before it is sent its secret.  The delay to wait for such
 
430
      approval and the default action (approve or deny) can be
 
431
      configured both globally and per client; see <citerefentry>
322
432
      <refentrytitle>mandos-clients.conf</refentrytitle>
323
 
      <manvolnum>5</manvolnum></citerefentry>.  A client successfully
324
 
      receiving its password will also be treated as a successful
325
 
      checker run.
326
 
    </para>
 
433
      <manvolnum>5</manvolnum></citerefentry>.  By default all clients
 
434
      will be approved immediately without delay.
 
435
    </para>
 
436
    <para>
 
437
      This can be used to deny a client its secret if not manually
 
438
      approved within a specified time.  It can also be used to make
 
439
      the server delay before giving a client its secret, allowing
 
440
      optional manual denying of this specific client.
 
441
    </para>
 
442
    
327
443
  </refsect1>
328
444
  
329
445
  <refsect1 id="logging">
330
446
    <title>LOGGING</title>
331
447
    <para>
332
448
      The server will send log message with various severity levels to
333
 
      <filename>/dev/log</filename>.  With the
 
449
      <filename class="devicefile">/dev/log</filename>.  With the
334
450
      <option>--debug</option> option, it will log even more messages,
335
451
      and also show them on the console.
336
452
    </para>
337
453
  </refsect1>
338
454
  
 
455
  <refsect1 id="persistent_state">
 
456
    <title>PERSISTENT STATE</title>
 
457
    <para>
 
458
      Client settings, initially read from
 
459
      <filename>clients.conf</filename>, are persistent across
 
460
      restarts, and run-time changes will override settings in
 
461
      <filename>clients.conf</filename>.  However, if a setting is
 
462
      <emphasis>changed</emphasis> (or a client added, or removed) in
 
463
      <filename>clients.conf</filename>, this will take precedence.
 
464
    </para>
 
465
  </refsect1>
 
466
  
 
467
  <refsect1 id="dbus_interface">
 
468
    <title>D-BUS INTERFACE</title>
 
469
    <para>
 
470
      The server will by default provide a D-Bus system bus interface.
 
471
      This interface will only be accessible by the root user or a
 
472
      Mandos-specific user, if such a user exists.  For documentation
 
473
      of the D-Bus API, see the file <filename>DBUS-API</filename>.
 
474
    </para>
 
475
  </refsect1>
 
476
  
339
477
  <refsect1 id="exit_status">
340
478
    <title>EXIT STATUS</title>
341
479
    <para>
393
531
        </listitem>
394
532
      </varlistentry>
395
533
      <varlistentry>
396
 
        <term><filename>/var/run/mandos.pid</filename></term>
397
 
        <listitem>
398
 
          <para>
399
 
            The file containing the process id of
400
 
            <command>&COMMANDNAME;</command>.
401
 
          </para>
402
 
        </listitem>
403
 
      </varlistentry>
404
 
      <varlistentry>
405
 
        <term><filename>/dev/log</filename></term>
 
534
        <term><filename>/run/mandos.pid</filename></term>
 
535
        <listitem>
 
536
          <para>
 
537
            The file containing the process id of the
 
538
            <command>&COMMANDNAME;</command> process started last.
 
539
            <emphasis >Note:</emphasis> If the <filename
 
540
            class="directory">/run</filename> directory does not
 
541
            exist, <filename>/var/run/mandos.pid</filename> will be
 
542
            used instead.
 
543
          </para>
 
544
        </listitem>
 
545
      </varlistentry>
 
546
      <varlistentry>
 
547
        <term><filename
 
548
        class="directory">/var/lib/mandos</filename></term>
 
549
        <listitem>
 
550
          <para>
 
551
            Directory where persistent state will be saved.  Change
 
552
            this with the <option>--statedir</option> option.  See
 
553
            also the <option>--no-restore</option> option.
 
554
          </para>
 
555
        </listitem>
 
556
      </varlistentry>
 
557
      <varlistentry>
 
558
        <term><filename class="devicefile">/dev/log</filename></term>
406
559
        <listitem>
407
560
          <para>
408
561
            The Unix domain socket to where local syslog messages are
431
584
      backtrace.  This could be considered a feature.
432
585
    </para>
433
586
    <para>
434
 
      Currently, if a client is declared <quote>invalid</quote> due to
435
 
      having timed out, the server does not record this fact onto
436
 
      permanent storage.  This has some security implications, see
437
 
      <xref linkend="clients"/>.
438
 
    </para>
439
 
    <para>
440
 
      There is currently no way of querying the server of the current
441
 
      status of clients, other than analyzing its <systemitem
442
 
      class="service">syslog</systemitem> output.
443
 
    </para>
444
 
    <para>
445
587
      There is no fine-grained control over logging and debug output.
446
588
    </para>
447
 
    <para>
448
 
      Debug mode is conflated with running in the foreground.
449
 
    </para>
450
 
    <para>
451
 
      The console log messages do not show a time stamp.
452
 
    </para>
453
 
    <para>
454
 
      This server does not check the expire time of clients’ OpenPGP
455
 
      keys.
456
 
    </para>
 
589
    <xi:include href="bugs.xml"/>
457
590
  </refsect1>
458
591
  
459
592
  <refsect1 id="example">
469
602
    <informalexample>
470
603
      <para>
471
604
        Run the server in debug mode, read configuration files from
472
 
        the <filename>~/mandos</filename> directory, and use the
473
 
        Zeroconf service name <quote>Test</quote> to not collide with
474
 
        any other official Mandos server on this host:
 
605
        the <filename class="directory">~/mandos</filename> directory,
 
606
        and use the Zeroconf service name <quote>Test</quote> to not
 
607
        collide with any other official Mandos server on this host:
475
608
      </para>
476
609
      <para>
477
610
 
509
642
      <title>CLIENTS</title>
510
643
      <para>
511
644
        The server only gives out its stored data to clients which
512
 
        does have the OpenPGP key of the stored fingerprint.  This is
513
 
        guaranteed by the fact that the client sends its OpenPGP
514
 
        public key in the TLS handshake; this ensures it to be
515
 
        genuine.  The server computes the fingerprint of the key
516
 
        itself and looks up the fingerprint in its list of
517
 
        clients. The <filename>clients.conf</filename> file (see
 
645
        does have the correct key ID of the stored key ID.  This is
 
646
        guaranteed by the fact that the client sends its public key in
 
647
        the TLS handshake; this ensures it to be genuine.  The server
 
648
        computes the key ID of the key itself and looks up the key ID
 
649
        in its list of clients. The <filename>clients.conf</filename>
 
650
        file (see
518
651
        <citerefentry><refentrytitle>mandos-clients.conf</refentrytitle>
519
652
        <manvolnum>5</manvolnum></citerefentry>)
520
653
        <emphasis>must</emphasis> be made non-readable by anyone
526
659
        compromised if they are gone for too long.
527
660
      </para>
528
661
      <para>
529
 
        If a client is compromised, its downtime should be duly noted
530
 
        by the server which would therefore declare the client
531
 
        invalid.  But if the server was ever restarted, it would
532
 
        re-read its client list from its configuration file and again
533
 
        regard all clients therein as valid, and hence eligible to
534
 
        receive their passwords.  Therefore, be careful when
535
 
        restarting servers if it is suspected that a client has, in
536
 
        fact, been compromised by parties who may now be running a
537
 
        fake Mandos client with the keys from the non-encrypted
538
 
        initial <acronym>RAM</acronym> image of the client host.  What
539
 
        should be done in that case (if restarting the server program
540
 
        really is necessary) is to stop the server program, edit the
541
 
        configuration file to omit any suspect clients, and restart
542
 
        the server program.
543
 
      </para>
544
 
      <para>
545
662
        For more details on client-side security, see
546
663
        <citerefentry><refentrytitle>mandos-client</refentrytitle>
547
664
        <manvolnum>8mandos</manvolnum></citerefentry>.
552
669
  <refsect1 id="see_also">
553
670
    <title>SEE ALSO</title>
554
671
    <para>
555
 
      <citerefentry>
556
 
        <refentrytitle>mandos-clients.conf</refentrytitle>
557
 
        <manvolnum>5</manvolnum></citerefentry>, <citerefentry>
558
 
        <refentrytitle>mandos.conf</refentrytitle>
559
 
        <manvolnum>5</manvolnum></citerefentry>, <citerefentry>
560
 
        <refentrytitle>mandos-client</refentrytitle>
561
 
        <manvolnum>8mandos</manvolnum></citerefentry>, <citerefentry>
562
 
        <refentrytitle>sh</refentrytitle><manvolnum>1</manvolnum>
563
 
      </citerefentry>
 
672
      <citerefentry><refentrytitle>intro</refentrytitle>
 
673
      <manvolnum>8mandos</manvolnum></citerefentry>,
 
674
      <citerefentry><refentrytitle>mandos-clients.conf</refentrytitle>
 
675
      <manvolnum>5</manvolnum></citerefentry>,
 
676
      <citerefentry><refentrytitle>mandos.conf</refentrytitle>
 
677
      <manvolnum>5</manvolnum></citerefentry>,
 
678
      <citerefentry><refentrytitle>mandos-client</refentrytitle>
 
679
      <manvolnum>8mandos</manvolnum></citerefentry>,
 
680
      <citerefentry><refentrytitle>sh</refentrytitle>
 
681
      <manvolnum>1</manvolnum></citerefentry>
564
682
    </para>
565
683
    <variablelist>
566
684
      <varlistentry>
587
705
      </varlistentry>
588
706
      <varlistentry>
589
707
        <term>
590
 
          <ulink url="http://www.gnu.org/software/gnutls/"
591
 
          >GnuTLS</ulink>
 
708
          <ulink url="https://gnutls.org/">GnuTLS</ulink>
592
709
        </term>
593
710
      <listitem>
594
711
        <para>
595
712
          GnuTLS is the library this server uses to implement TLS for
596
713
          communicating securely with the client, and at the same time
597
 
          confidently get the client’s public OpenPGP key.
 
714
          confidently get the client’s public key.
598
715
        </para>
599
716
      </listitem>
600
717
      </varlistentry>
632
749
      </varlistentry>
633
750
      <varlistentry>
634
751
        <term>
635
 
          RFC 4346: <citetitle>The Transport Layer Security (TLS)
636
 
          Protocol Version 1.1</citetitle>
 
752
          RFC 5246: <citetitle>The Transport Layer Security (TLS)
 
753
          Protocol Version 1.2</citetitle>
637
754
        </term>
638
755
      <listitem>
639
756
        <para>
640
 
          TLS 1.1 is the protocol implemented by GnuTLS.
 
757
          TLS 1.2 is the protocol implemented by GnuTLS.
641
758
        </para>
642
759
      </listitem>
643
760
      </varlistentry>
653
770
      </varlistentry>
654
771
      <varlistentry>
655
772
        <term>
656
 
          RFC 5081: <citetitle>Using OpenPGP Keys for Transport Layer
657
 
          Security</citetitle>
658
 
        </term>
659
 
      <listitem>
660
 
        <para>
661
 
          This is implemented by GnuTLS and used by this server so
662
 
          that OpenPGP keys can be used.
 
773
          RFC 7250: <citetitle>Using Raw Public Keys in Transport
 
774
          Layer Security (TLS) and Datagram Transport Layer Security
 
775
          (DTLS)</citetitle>
 
776
        </term>
 
777
      <listitem>
 
778
        <para>
 
779
          This is implemented by GnuTLS version 3.6.6 and is, if
 
780
          present, used by this server so that raw public keys can be
 
781
          used.
 
782
        </para>
 
783
      </listitem>
 
784
      </varlistentry>
 
785
      <varlistentry>
 
786
        <term>
 
787
          RFC 6091: <citetitle>Using OpenPGP Keys for Transport Layer
 
788
          Security (TLS) Authentication</citetitle>
 
789
        </term>
 
790
      <listitem>
 
791
        <para>
 
792
          This is implemented by GnuTLS before version 3.6.0 and is,
 
793
          if present, used by this server so that OpenPGP keys can be
 
794
          used.
663
795
        </para>
664
796
      </listitem>
665
797
      </varlistentry>