/mandos/trunk

To get this branch, use:
bzr branch http://bzr.recompile.se/loggerhead/mandos/trunk

« back to all changes in this revision

Viewing changes to Makefile

  • Committer: Teddy Hogeborn
  • Date: 2019-02-09 23:23:26 UTC
  • Revision ID: teddy@recompile.se-20190209232326-z1z2kzpgfixz7iaj
Add support for using raw public keys in TLS (RFC 7250)

Since GnuTLS removed support for OpenPGP keys in TLS (RFC 6091), and
no other library supports it, we have to change the protocol to use
something else.  We choose to use "raw public keys" (RFC 7250).  Since
we still use OpenPGP keys to decrypt the secret password, this means
that each client will have two keys: One OpenPGP key and one TLS
public/private key, and the key ID of the latter key is used to
identify clients instead of the fingerprint of the OpenPGP key.

Note that this code is still compatible with GnuTLS before version
3.6.0 (when OpenPGP key support was removed).  This commit merely adds
support for using raw pulic keys instead with GnuTLS 3.6.6. or later.

* DBUS-API (Signals/ClientNotFound): Change name of first parameter
                                     from "Fingerprint" to "KeyID".
  (Mandos Client Interface/Properties/KeyID): New.
* INSTALL: Document conflict with GnuTLS 3.6.0 (which removed OpenPGP
           key support) up until 3.6.6, when support for raw public
           keys was added.  Also document new dependency of client on
           "gnutls-bin" package (for certtool).
* Makefile (run-client): Depend on TLS key files, and also pass them
                         as arguments to client.
  (keydir/tls-privkey.pem, keydir/tls-pubkey.pem): New.
  (confdir/clients.conf): Add dependency on TLS public key.
  (purge-client): Add removal of TLS key files.
* clients.conf ([foo]/key_id, [bar]/key_id): New.
* debian/control (Source: mandos/Build-Depends): Also allow
                                                 libgnutls30 (>= 3.6.6)
  (Package: mandos/Depends): - '' -
  (Package: mandos/Description): Alter description to match new
                                 design.
  (Package: mandos-client/Description): - '' -
  (Package: mandos-client/Depends): Move "gnutls-bin | openssl" to
                                    here from "Recommends".
* debian/mandos-client.README.Debian: Add --tls-privkey and
                                      --tls-pubkey options to test
                                      command.
* debian/mandos-client.postinst (create_key): Renamed to "create_keys"
                                             (all callers changed),
                                             and also create TLS key.
* debian/mandos-client.postrm (purge): Also remove TLS key files.
* intro.xml (DESCRIPTION): Describe new dual-key design.
* mandos (GnuTLS): Define different functions depending on whether
                   support for raw public keys is detected.
  (Client.key_id): New attribute.
  (ClientDBus.KeyID_dbus_property): New method.
  (ProxyClient.__init__): Take new "key_id" parameter.
  (ClientHandler.handle): Use key IDs when using raw public keys and
                          use fingerprints when using OpenPGP keys.
  (ClientHandler.peer_certificate): Also handle raw public keys.
  (ClientHandler.key_id): New.
  (MandosServer.handle_ipc): Pass key ID over the pipe IPC.  Also
                             check for key ID matches when looking up
                             clients.
  (main): Default GnuTLS priority string depends on whether we are
          using raw public keys or not.  When unpickling clients, set
          key_id if not set in the pickle.
  (main/MandosDBusService.ClientNotFound): Change name of first
                                           parameter from
                                           "Fingerprint" to "KeyID".
* mandos-clients.conf.xml (OPTIONS): Document new "key_id" option.
  (OPTIONS/secret): Mention new key ID matchning.
  (EXPANSION/RUNTIME EXPANSION): Add new "key_id" option.
  (EXAMPLE): - '' -
* mandos-ctl (tablewords, main/keywords): Add new "KeyID" property.
* mandos-keygen: Create TLS key files.  New "--tls-keytype" (-T)
                 option.  Alter help text to be more clear about key
                 types.  When in password mode, also output "key_id"
                 option.
* mandos-keygen.xml (SYNOPSIS): Add new "--tls-keytype" (-T) option.
  (DESCRIPTION): Alter to match new dual-key design.
  (OVERVIEW): - '' -
  (FILES): Add TLS key files.
* mandos-options.xml (priority): Document new default priority string
                                 when using raw public keys.
* mandos.xml (NETWORK PROTOCOL): Describe new protocol using key ID.
  (BUGS): Remove issue about checking expire times of OpenPGP keys,
          since TLS public keys do not have expiration times.
  (SECURITY/CLIENT): Alter description to match new design.
  (SEE ALSO/GnuTLS): - '' -
  (SEE ALSO): Add reference to RFC 7250, and alter description of when
              RFC 6091 is used.
* overview.xml: Alter text to match new design.
* plugin-runner.xml (EXAMPLE): Add --tls-pubkey and --tls-privkey
                               options to mandos-client options.
* plugins.d/mandos-client.c: Use raw public keys when compiling with
                             supporting GnuTLS versions. Add new
                             "--tls-pubkey" and "--tls-privkey"
                             options (which do nothing if GnuTLS
                             library does not support raw public
                             keys).  Alter text throughout to reflect
                             new design.  Only generate new DH
                             parameters (based on size of OpenPGP key)
                             when using OpenPGP in TLS.  Default
                             GnuTLS priority string depends on whether
                             we are using raw public keys or not.
* plugins.d/mandos-client.xml (SYNOPSIS): Add new "--tls-privkey" (-t)
                                          and "--tls-pubkey" (-T)
                                          options.
  (DESCRIPTION): Describe new dual-key design.
  (OPTIONS): Document new "--tls-privkey" (-t) and "--tls-pubkey" (-T)
             options.
  (OPTIONS/--dh-bits): No longer necessarily depends on OpenPGP key
                       size.
  (FILES): Add default locations for TLS public and private key files.
  (EXAMPLE): Use new --tls-pubkey and --tls-privkey options.
  (SECURITY): Alter wording slightly to reflect new dual-key design.
  (SEE ALSO/GnuTLS): Alter description to match new design.
  (SEE ALSO): Add reference to RFC 7250, and alter description of when
              RFC 6091 is used.

Show diffs side-by-side

added added

removed removed

Lines of Context:
1
 
WARN=-O -Wall -Wformat=2 -Winit-self -Wmissing-include-dirs \
2
 
        -Wswitch-default -Wswitch-enum -Wunused-parameter \
3
 
        -Wstrict-aliasing=1 -Wextra -Wfloat-equal -Wundef -Wshadow \
 
1
WARN:=-O -Wall -Wextra -Wdouble-promotion -Wformat=2 -Winit-self \
 
2
        -Wmissing-include-dirs -Wswitch-default -Wswitch-enum \
 
3
        -Wunused -Wuninitialized -Wstrict-overflow=5 \
 
4
        -Wsuggest-attribute=pure -Wsuggest-attribute=const \
 
5
        -Wsuggest-attribute=noreturn -Wfloat-equal -Wundef -Wshadow \
4
6
        -Wunsafe-loop-optimizations -Wpointer-arith \
5
7
        -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings \
6
 
        -Wconversion -Wstrict-prototypes -Wold-style-definition \
7
 
        -Wpacked -Wnested-externs -Winline -Wvolatile-register-var \
8
 
        -Wunreachable-code
9
 
#DEBUG=-ggdb3
 
8
        -Wconversion -Wlogical-op -Waggregate-return \
 
9
        -Wstrict-prototypes -Wold-style-definition \
 
10
        -Wmissing-format-attribute -Wnormalized=nfc -Wpacked \
 
11
        -Wredundant-decls -Wnested-externs -Winline -Wvla \
 
12
        -Wvolatile-register-var -Woverlength-strings
 
13
#DEBUG:=-ggdb3 -fsanitize=address 
10
14
# For info about _FORTIFY_SOURCE, see feature_test_macros(7)
11
 
# and <http://gcc.gnu.org/ml/gcc-patches/2004-09/msg02055.html>.
12
 
FORTIFY=-D_FORTIFY_SOURCE=2 -fstack-protector-all -fPIC
13
 
LINK_FORTIFY_LD=-z relro -z now
14
 
LINK_FORTIFY=
 
15
# and <https://gcc.gnu.org/ml/gcc-patches/2004-09/msg02055.html>.
 
16
FORTIFY:=-D_FORTIFY_SOURCE=2 -fstack-protector-all -fPIC
 
17
# <https://developerblog.redhat.com/2014/10/16/gcc-undefined-behavior-sanitizer-ubsan/>
 
18
ALL_SANITIZE_OPTIONS:=-fsanitize=leak -fsanitize=undefined \
 
19
        -fsanitize=shift -fsanitize=integer-divide-by-zero \
 
20
        -fsanitize=unreachable -fsanitize=vla-bound -fsanitize=null \
 
21
        -fsanitize=return -fsanitize=signed-integer-overflow \
 
22
        -fsanitize=bounds -fsanitize=alignment \
 
23
        -fsanitize=object-size -fsanitize=float-divide-by-zero \
 
24
        -fsanitize=float-cast-overflow -fsanitize=nonnull-attribute \
 
25
        -fsanitize=returns-nonnull-attribute -fsanitize=bool \
 
26
        -fsanitize=enum
 
27
# Check which sanitizing options can be used
 
28
SANITIZE:=$(foreach option,$(ALL_SANITIZE_OPTIONS),$(shell \
 
29
        echo 'int main(){}' | $(CC) --language=c $(option) /dev/stdin \
 
30
        -o /dev/null >/dev/null 2>&1 && echo $(option)))
 
31
LINK_FORTIFY_LD:=-z relro -z now
 
32
LINK_FORTIFY:=
15
33
 
16
34
# If BROKEN_PIE is set, do not build with -pie
17
35
ifndef BROKEN_PIE
19
37
LINK_FORTIFY += -pie
20
38
endif
21
39
#COVERAGE=--coverage
22
 
OPTIMIZE=-Os
23
 
LANGUAGE=-std=gnu99
24
 
htmldir=man
25
 
version=1.6.4
26
 
SED=sed
 
40
OPTIMIZE:=-Os -fno-strict-aliasing
 
41
LANGUAGE:=-std=gnu11
 
42
htmldir:=man
 
43
version:=1.7.20
 
44
SED:=sed
27
45
 
28
 
USER=$(firstword $(subst :, ,$(shell getent passwd _mandos || getent passwd nobody || echo 65534)))
29
 
GROUP=$(firstword $(subst :, ,$(shell getent group _mandos || getent group nobody || echo 65534)))
 
46
USER:=$(firstword $(subst :, ,$(shell getent passwd _mandos || getent passwd nobody || echo 65534)))
 
47
GROUP:=$(firstword $(subst :, ,$(shell getent group _mandos || getent group nogroup || echo 65534)))
30
48
 
31
49
## Use these settings for a traditional /usr/local install
32
 
# PREFIX=$(DESTDIR)/usr/local
33
 
# CONFDIR=$(DESTDIR)/etc/mandos
34
 
# KEYDIR=$(DESTDIR)/etc/mandos/keys
35
 
# MANDIR=$(PREFIX)/man
36
 
# INITRAMFSTOOLS=$(DESTDIR)/etc/initramfs-tools
37
 
# STATEDIR=$(DESTDIR)/var/lib/mandos
38
 
# LIBDIR=$(PREFIX)/lib
 
50
# PREFIX:=$(DESTDIR)/usr/local
 
51
# CONFDIR:=$(DESTDIR)/etc/mandos
 
52
# KEYDIR:=$(DESTDIR)/etc/mandos/keys
 
53
# MANDIR:=$(PREFIX)/man
 
54
# INITRAMFSTOOLS:=$(DESTDIR)/etc/initramfs-tools
 
55
# STATEDIR:=$(DESTDIR)/var/lib/mandos
 
56
# LIBDIR:=$(PREFIX)/lib
39
57
##
40
58
 
41
59
## These settings are for a package-type install
42
 
PREFIX=$(DESTDIR)/usr
43
 
CONFDIR=$(DESTDIR)/etc/mandos
44
 
KEYDIR=$(DESTDIR)/etc/keys/mandos
45
 
MANDIR=$(PREFIX)/share/man
46
 
INITRAMFSTOOLS=$(DESTDIR)/usr/share/initramfs-tools
47
 
STATEDIR=$(DESTDIR)/var/lib/mandos
48
 
LIBDIR=$(shell \
 
60
PREFIX:=$(DESTDIR)/usr
 
61
CONFDIR:=$(DESTDIR)/etc/mandos
 
62
KEYDIR:=$(DESTDIR)/etc/keys/mandos
 
63
MANDIR:=$(PREFIX)/share/man
 
64
INITRAMFSTOOLS:=$(DESTDIR)/usr/share/initramfs-tools
 
65
STATEDIR:=$(DESTDIR)/var/lib/mandos
 
66
LIBDIR:=$(shell \
49
67
        for d in \
50
68
        "/usr/lib/`dpkg-architecture -qDEB_HOST_MULTIARCH 2>/dev/null`" \
51
69
        "`rpm --eval='%{_libdir}' 2>/dev/null`" /usr/lib; do \
56
74
        done)
57
75
##
58
76
 
59
 
SYSTEMD=$(DESTDIR)$(shell pkg-config systemd --variable=systemdsystemunitdir)
 
77
SYSTEMD:=$(DESTDIR)$(shell pkg-config systemd --variable=systemdsystemunitdir)
 
78
TMPFILES:=$(DESTDIR)$(shell pkg-config systemd --variable=tmpfilesdir)
60
79
 
61
 
GNUTLS_CFLAGS=$(shell pkg-config --cflags-only-I gnutls)
62
 
GNUTLS_LIBS=$(shell pkg-config --libs gnutls)
63
 
AVAHI_CFLAGS=$(shell pkg-config --cflags-only-I avahi-core)
64
 
AVAHI_LIBS=$(shell pkg-config --libs avahi-core)
65
 
GPGME_CFLAGS=$(shell gpgme-config --cflags; getconf LFS_CFLAGS)
66
 
GPGME_LIBS=$(shell gpgme-config --libs; getconf LFS_LIBS; \
 
80
GNUTLS_CFLAGS:=$(shell pkg-config --cflags-only-I gnutls)
 
81
GNUTLS_LIBS:=$(shell pkg-config --libs gnutls)
 
82
AVAHI_CFLAGS:=$(shell pkg-config --cflags-only-I avahi-core)
 
83
AVAHI_LIBS:=$(shell pkg-config --libs avahi-core)
 
84
GPGME_CFLAGS:=$(shell gpgme-config --cflags; getconf LFS_CFLAGS)
 
85
GPGME_LIBS:=$(shell gpgme-config --libs; getconf LFS_LIBS; \
67
86
        getconf LFS_LDFLAGS)
 
87
LIBNL3_CFLAGS:=$(shell pkg-config --cflags-only-I libnl-route-3.0)
 
88
LIBNL3_LIBS:=$(shell pkg-config --libs libnl-route-3.0)
68
89
 
69
90
# Do not change these two
70
 
CFLAGS+=$(WARN) $(DEBUG) $(FORTIFY) $(COVERAGE) $(OPTIMIZE) \
71
 
        $(LANGUAGE) $(GNUTLS_CFLAGS) $(AVAHI_CFLAGS) $(GPGME_CFLAGS) \
72
 
        -DVERSION='"$(version)"'
 
91
CFLAGS+=$(WARN) $(DEBUG) $(FORTIFY) $(SANITIZE) $(COVERAGE) \
 
92
        $(OPTIMIZE) $(LANGUAGE) -DVERSION='"$(version)"'
73
93
LDFLAGS+=-Xlinker --as-needed $(COVERAGE) $(LINK_FORTIFY) $(foreach flag,$(LINK_FORTIFY_LD),-Xlinker $(flag))
74
94
 
75
95
# Commands to format a DocBook <refentry> document into a manual page
81
101
        --param man.authors.section.enabled     0 \
82
102
        /usr/share/xml/docbook/stylesheet/nwalsh/manpages/docbook.xsl \
83
103
        $(notdir $<); \
84
 
        $(MANPOST) $(notdir $@);\
85
104
        if locale --all 2>/dev/null | grep --regexp='^en_US\.utf8$$' \
86
105
        && type man 2>/dev/null; then LANG=en_US.UTF-8 MANWIDTH=80 \
87
106
        man --warnings --encoding=UTF-8 --local-file $(notdir $@); \
88
107
        fi >/dev/null)
89
 
# DocBook-to-man post-processing to fix a '\n' escape bug
90
 
MANPOST=$(SED) --in-place --expression='s,\\\\en,\\en,g;s,\\n,\\en,g'
91
108
 
92
109
DOCBOOKTOHTML=$(strip xsltproc --nonet --xinclude \
93
110
        --param make.year.ranges                1 \
99
116
        /usr/share/xml/docbook/stylesheet/nwalsh/xhtml/docbook.xsl \
100
117
        $<; $(HTMLPOST) $@)
101
118
# Fix citerefentry links
102
 
HTMLPOST=$(SED) --in-place \
 
119
HTMLPOST:=$(SED) --in-place \
103
120
        --expression='s/\(<a class="citerefentry" href="\)\("><span class="citerefentry"><span class="refentrytitle">\)\([^<]*\)\(<\/span>(\)\([^)]*\)\()<\/span><\/a>\)/\1\3.\5\2\3\4\5\6/g'
104
121
 
105
 
PLUGINS=plugins.d/password-prompt plugins.d/mandos-client \
 
122
PLUGINS:=plugins.d/password-prompt plugins.d/mandos-client \
106
123
        plugins.d/usplash plugins.d/splashy plugins.d/askpass-fifo \
107
124
        plugins.d/plymouth
108
 
CPROGS=plugin-runner $(PLUGINS)
109
 
PROGS=mandos mandos-keygen mandos-ctl mandos-monitor $(CPROGS)
110
 
DOCS=mandos.8 mandos-keygen.8 mandos-monitor.8 mandos-ctl.8 \
 
125
PLUGIN_HELPERS:=plugin-helpers/mandos-client-iprouteadddel
 
126
CPROGS:=plugin-runner $(PLUGINS) $(PLUGIN_HELPERS)
 
127
PROGS:=mandos mandos-keygen mandos-ctl mandos-monitor $(CPROGS)
 
128
DOCS:=mandos.8 mandos-keygen.8 mandos-monitor.8 mandos-ctl.8 \
111
129
        mandos.conf.5 mandos-clients.conf.5 plugin-runner.8mandos \
112
130
        plugins.d/mandos-client.8mandos \
113
131
        plugins.d/password-prompt.8mandos plugins.d/usplash.8mandos \
114
132
        plugins.d/splashy.8mandos plugins.d/askpass-fifo.8mandos \
115
133
        plugins.d/plymouth.8mandos intro.8mandos
116
134
 
117
 
htmldocs=$(addsuffix .xhtml,$(DOCS))
 
135
htmldocs:=$(addsuffix .xhtml,$(DOCS))
118
136
 
119
 
objects=$(addsuffix .o,$(CPROGS))
 
137
objects:=$(addsuffix .o,$(CPROGS))
120
138
 
121
139
all: $(PROGS) mandos.lsm
122
140
 
234
252
                --expression='s/\(mandos_\)[0-9.]\+\(\.orig\.tar\.gz\)/\1$(version)\2/' \
235
253
                $@)
236
254
 
 
255
# Need to add the GnuTLS, Avahi and GPGME libraries, and can't use
 
256
# -fsanitize=leak because GnuTLS and GPGME both leak memory.
237
257
plugins.d/mandos-client: plugins.d/mandos-client.c
238
 
        $(LINK.c) $^ -lrt $(GNUTLS_LIBS) $(AVAHI_LIBS) $(strip\
 
258
        $(CC) $(filter-out -fsanitize=leak,$(CFLAGS)) $(strip\
 
259
        ) $(GNUTLS_CFLAGS) $(AVAHI_CFLAGS) $(GPGME_CFLAGS) $(strip\
 
260
                ) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH) $^ $(strip\
 
261
                ) -lrt $(GNUTLS_LIBS) $(AVAHI_LIBS) $(strip\
239
262
                ) $(GPGME_LIBS) $(LOADLIBES) $(LDLIBS) -o $@
240
263
 
 
264
plugin-helpers/mandos-client-iprouteadddel: plugin-helpers/mandos-client-iprouteadddel.c
 
265
        $(LINK.c) $(LIBNL3_CFLAGS) $^ $(LIBNL3_LIBS) $(strip\
 
266
                ) $(LOADLIBES) $(LDLIBS) -o $@
 
267
 
241
268
.PHONY : all doc html clean distclean mostlyclean maintainer-clean \
242
269
        check run-client run-server install install-html \
243
270
        install-server install-client-nokey install-client uninstall \
257
284
        ./mandos-ctl --check
258
285
 
259
286
# Run the client with a local config and key
260
 
run-client: all keydir/seckey.txt keydir/pubkey.txt
 
287
run-client: all keydir/seckey.txt keydir/pubkey.txt keydir/tls-privkey.pem keydir/tls-pubkey.pem
261
288
        @echo "###################################################################"
262
289
        @echo "# The following error messages are harmless and can be safely     #"
263
 
        @echo "# ignored.  The messages are caused by not running as root, but   #"
264
 
        @echo "# you should NOT run \"make run-client\" as root unless you also    #"
265
 
        @echo "# unpacked and compiled Mandos as root, which is NOT recommended. #"
266
 
        @echo "# From plugin-runner: setuid: Operation not permitted             #"
 
290
        @echo "# ignored:                                                        #"
 
291
        @echo "# From plugin-runner: setgid: Operation not permitted             #"
 
292
        @echo "#                     setuid: Operation not permitted             #"
267
293
        @echo "# From askpass-fifo:  mkfifo: Permission denied                   #"
268
 
        @echo "# From mandos-client: setuid: Operation not permitted             #"
269
 
        @echo "#                     seteuid: Operation not permitted            #"
270
 
        @echo "#                     klogctl: Operation not permitted            #"
 
294
        @echo "# From mandos-client:                                             #"
 
295
        @echo "#             Failed to raise privileges: Operation not permitted #"
 
296
        @echo "#             Warning: network hook \"*\" exited with status *      #"
 
297
        @echo "#                                                                 #"
 
298
        @echo "# (The messages are caused by not running as root, but you should #"
 
299
        @echo "# NOT run \"make run-client\" as root unless you also unpacked and  #"
 
300
        @echo "# compiled Mandos as root, which is also NOT recommended.)        #"
271
301
        @echo "###################################################################"
 
302
# We set GNOME_KEYRING_CONTROL to block pam_gnome_keyring
272
303
        ./plugin-runner --plugin-dir=plugins.d \
 
304
                --plugin-helper-dir=plugin-helpers \
273
305
                --config-file=plugin-runner.conf \
274
 
                --options-for=mandos-client:--seckey=keydir/seckey.txt,--pubkey=keydir/pubkey.txt,--network-hook-dir=network-hooks.d \
 
306
                --options-for=mandos-client:--seckey=keydir/seckey.txt,--pubkey=keydir/pubkey.txt,--tls-privkey=keydir/tls-privkey.pem,--tls-pubkey=keydir/tls-pubkey.pem,--network-hook-dir=network-hooks.d \
 
307
                --env-for=mandos-client:GNOME_KEYRING_CONTROL= \
275
308
                $(CLIENTARGS)
276
309
 
277
310
# Used by run-client
278
 
keydir/seckey.txt keydir/pubkey.txt: mandos-keygen
 
311
keydir/seckey.txt keydir/pubkey.txt keydir/tls-privkey.pem keydir/tls-pubkey.pem: mandos-keygen
279
312
        install --directory keydir
280
313
        ./mandos-keygen --dir keydir --force
281
314
 
288
321
confdir/mandos.conf: mandos.conf
289
322
        install --directory confdir
290
323
        install --mode=u=rw,go=r $^ $@
291
 
confdir/clients.conf: clients.conf keydir/seckey.txt
 
324
confdir/clients.conf: clients.conf keydir/seckey.txt keydir/tls-pubkey.pem
292
325
        install --directory confdir
293
326
        install --mode=u=rw $< $@
294
327
# Add a client password
295
 
        ./mandos-keygen --dir keydir --password >> $@
 
328
        ./mandos-keygen --dir keydir --password --no-ssh >> $@
296
329
statedir:
297
330
        install --directory statedir
298
331
 
311
344
        elif install --directory --mode=u=rwx $(STATEDIR); then \
312
345
                chown -- $(USER):$(GROUP) $(STATEDIR) || :; \
313
346
        fi
 
347
        if [ "$(TMPFILES)" != "$(DESTDIR)" -a -d "$(TMPFILES)" ]; then \
 
348
                install --mode=u=rw,go=r tmpfiles.d-mandos.conf \
 
349
                        $(TMPFILES)/mandos.conf; \
 
350
        fi
314
351
        install --mode=u=rwx,go=rx mandos $(PREFIX)/sbin/mandos
315
352
        install --mode=u=rwx,go=rx --target-directory=$(PREFIX)/sbin \
316
353
                mandos-ctl
348
385
install-client-nokey: all doc
349
386
        install --directory $(LIBDIR)/mandos $(CONFDIR)
350
387
        install --directory --mode=u=rwx $(KEYDIR) \
351
 
                $(LIBDIR)/mandos/plugins.d
 
388
                $(LIBDIR)/mandos/plugins.d \
 
389
                $(LIBDIR)/mandos/plugin-helpers
352
390
        if [ "$(CONFDIR)" != "$(LIBDIR)/mandos" ]; then \
353
391
                install --mode=u=rwx \
354
 
                        --directory "$(CONFDIR)/plugins.d"; \
 
392
                        --directory "$(CONFDIR)/plugins.d" \
 
393
                        "$(CONFDIR)/plugin-helpers"; \
355
394
        fi
356
395
        install --mode=u=rwx,go=rx --directory \
357
396
                "$(CONFDIR)/network-hooks.d"
358
397
        install --mode=u=rwx,go=rx \
359
398
                --target-directory=$(LIBDIR)/mandos plugin-runner
 
399
        install --mode=u=rwx,go=rx \
 
400
                --target-directory=$(LIBDIR)/mandos mandos-to-cryptroot-unlock
360
401
        install --mode=u=rwx,go=rx --target-directory=$(PREFIX)/sbin \
361
402
                mandos-keygen
362
403
        install --mode=u=rwx,go=rx \
377
418
        install --mode=u=rwxs,go=rx \
378
419
                --target-directory=$(LIBDIR)/mandos/plugins.d \
379
420
                plugins.d/plymouth
 
421
        install --mode=u=rwx,go=rx \
 
422
                --target-directory=$(LIBDIR)/mandos/plugin-helpers \
 
423
                plugin-helpers/mandos-client-iprouteadddel
380
424
        install initramfs-tools-hook \
381
425
                $(INITRAMFSTOOLS)/hooks/mandos
382
 
        install --mode=u=rw,go=r initramfs-tools-hook-conf \
383
 
                $(INITRAMFSTOOLS)/conf-hooks.d/mandos
 
426
        install --mode=u=rw,go=r initramfs-tools-conf \
 
427
                $(INITRAMFSTOOLS)/conf.d/mandos-conf
384
428
        install initramfs-tools-script \
385
429
                $(INITRAMFSTOOLS)/scripts/init-premount/mandos
 
430
        install initramfs-tools-script-stop \
 
431
                $(INITRAMFSTOOLS)/scripts/local-premount/mandos
386
432
        install --mode=u=rw,go=r plugin-runner.conf $(CONFDIR)
387
433
        gzip --best --to-stdout mandos-keygen.8 \
388
434
                > $(MANDIR)/man8/mandos-keygen.8.gz
462
508
        -rmdir $(CONFDIR)
463
509
 
464
510
purge-client: uninstall-client
465
 
        -shred --remove $(KEYDIR)/seckey.txt
 
511
        -shred --remove $(KEYDIR)/seckey.txt $(KEYDIR)/tls-privkey.pem
466
512
        -rm --force $(CONFDIR)/plugin-runner.conf \
467
 
                $(KEYDIR)/pubkey.txt $(KEYDIR)/seckey.txt
 
513
                $(KEYDIR)/pubkey.txt $(KEYDIR)/seckey.txt \
 
514
                $(KEYDIR)/tls-pubkey.txt $(KEYDIR)/tls-privkey.txt
468
515
        -rmdir $(KEYDIR) $(CONFDIR)/plugins.d $(CONFDIR)