62
76
"clients.conf", in which case they are fully documented in
63
77
mandos-clients.conf(5).
65
| Name | Type | Access | clients.conf |
66
|-------------------------+------+------------+---------------------|
67
| ApprovedByDefault | b | Read/Write | approved_by_default |
68
| ApprovalDelay (a) | t | Read/Write | approval_delay |
69
| ApprovalDuration (a) | t | Read/Write | approval_duration |
70
| ApprovalPending (b) | b | Read | N/A |
71
| Checker | s | Read/Write | checker |
72
| CheckerRunning (c) | b | Read/Write | N/A |
73
| Created (d) | s | Read | N/A |
74
| Enabled (e) | b | Read/Write | N/A |
75
| Expires (f) | s | Read | N/A |
76
| ExtendedTimeout (a) | t | Read/Write | extended_timeout |
77
| Fingerprint | s | Read | fingerprint |
78
| Host | s | Read/Write | host |
79
| Interval (a) | t | Read/Write | interval |
80
| LastApprovalRequest (g) | s | Read | N/A |
81
| LastCheckedOK (h) | s | Read/Write | N/A |
82
| LastCheckerStatus (i) | n | Read | N/A |
83
| LastEnabled (j) | s | Read | N/A |
84
| Name | s | Read | (Section name) |
85
| ObjectPath | o | Read | N/A |
86
| Secret (k) | ay | Write | secret (or secfile) |
87
| Timeout (a) | t | Read/Write | timeout |
79
| Name | Type | Access | clients.conf |
80
|----------------------+------+------------+---------------------|
81
| ApprovedByDefault | b | Read/Write | approved_by_default |
82
| ApprovalDelay (a) | t | Read/Write | approval_delay |
83
| ApprovalDuration (a) | t | Read/Write | approval_duration |
84
| ApprovalPending (b) | b | Read | N/A |
85
| Checker | s | Read/Write | checker |
86
| CheckerRunning (c) | b | Read/Write | N/A |
87
| Created (d) | s | Read | N/A |
88
| Enabled (e) | b | Read/Write | N/A |
89
| Fingerprint | s | Read | fingerprint |
90
| Host | s | Read/Write | host |
91
| Interval (a) | t | Read/Write | interval |
92
| LastCheckedOK (f) | s | Read/Write | N/A |
93
| LastEnabled (g) | s | Read | N/A |
94
| Name | s | Read | (Section name) |
95
| ObjectPath | o | Read | N/A |
96
| Secret (h) | ay | Write | secret (or secfile) |
97
| Timeout (a) | t | Read/Write | timeout |
89
99
a) Represented as milliseconds.
91
101
b) An approval is currently pending.
93
c) Changing this property can either start a new checker or abort a
96
d) The creation time of this client object, as an RFC 3339 string.
98
e) Changing this property enables or disables a client.
100
f) The date and time this client will be disabled, as an RFC 3339
101
string, or an empty string if this is not scheduled.
103
g) The date and time of the last approval request, as an RFC 3339
104
string, or an empty string if this has not happened.
106
h) The date and time a checker was last successful, as an RFC 3339
107
string, or an empty string if this has not happened. Setting
108
this property is equivalent to calling CheckedOK(), i.e. the
109
current time is set, regardless of the string sent. Please
110
always use an empty string when setting this property, to allow
111
for possible future expansion.
113
i) The exit status of the last checker, -1 if it did not exit
114
cleanly, -2 if a checker has not yet returned.
116
j) The date and time this client was last enabled, as an RFC 3339
117
string, or an empty string if this has not happened.
119
k) A raw byte array, not hexadecimal digits.
103
c) Setting this property is equivalent to calling StartChecker() or
106
d) The creation time of this client object, as a RFC 3339 string.
108
e) Setting this property is equivalent to calling Enable() or
111
f) The last time a checker was successful, as a RFC 3339 string, or
112
an empty string if this has not happened. Setting this property
113
is equivalent to calling CheckedOK(), i.e. the current time is
114
set, regardless of the string sent. Please always use an empty
115
string when setting this property, to allow for possible future
118
g) The last time this client was enabled, as a RFC 3339 string, or
119
an empty string if this has not happened.
121
h) A raw byte array, not hexadecimal digits.
122
*** CheckerCompleted(n: Exitcode, x: Signal, s: Command)
124
*** CheckerCompleted(n: Exitcode, x: Waitstatus, s: Command)
123
125
A checker (Command) has completed. Exitcode is either the exit
124
code or -1 for abnormal exit, in which case, the signal number
126
code or -1 for abnormal exit. In any case, the full Waitstatus
127
(as from wait(2)) is also available.
127
129
*** CheckerStarted(s: Command)
128
130
A checker command (Command) has just been started.
134
136
This client will be approved or denied in exactly Timeout
135
137
milliseconds, depending on ApprovedByDefault. Approve() can now
136
138
usefully be called on this client object.
140
*** PropertyChanged(s: Property, v: Value)
141
The Property on this client has changed to Value.
138
143
*** Rejected(s: Reason)
139
144
This client was not given its secret for a specified Reason.
143
Copyright © 2010-2015 Teddy Hogeborn
144
Copyright © 2010-2015 Björn Påhlsson
148
This program is free software: you can redistribute it and/or
149
modify it under the terms of the GNU General Public License as
150
published by the Free Software Foundation, either version 3 of the
151
License, or (at your option) any later version.
153
This program is distributed in the hope that it will be useful, but
154
WITHOUT ANY WARRANTY; without even the implied warranty of
155
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
156
General Public License for more details.
158
You should have received a copy of the GNU General Public License
159
along with this program. If not, see
160
<http://www.gnu.org/licenses/>.
163
147
#+STARTUP: showall
added
removed
DBUS-API
