1
This file documents the next steps to take after installation of the
2
Debian package, and also contain some notes specific to the Debian
3
packaging which are not also in the manual.
1
* Choose the Client Network Interface
3
You MUST make sure that the correct network interface is specified
4
in the DEVICE setting in the "/etc/initramfs-tools/initramfs.conf"
5
file. *If* this is changed, it will be necessary to update the
6
initrd image by running the command
8
update-initramfs -k all -u
10
The device can be overridden at boot time on the Linux kernel
11
command line using the sixth colon-separated field of the "ip="
12
option; for exact syntax, read the documentation in the file
13
"/usr/share/doc/linux-doc-*/Documentation/filesystems/nfsroot.txt",
14
available in the "linux-doc-*" package.
16
Note that since this network interface is used in the initial RAM
17
disk environment, the network interface *must* exist at that stage.
18
Thus, the interface can *not* be a pseudo-interface such as "br0" or
19
"tun0"; instead, a real interface (such as "eth0") must be used.
5
21
* Adding a Client Password to the Server
20
36
is possible to verify that the correct password will be received by
21
37
this client by running the command, on the client:
23
MANDOSPLUGINHELPERDIR=/usr/lib/$(dpkg-architecture \
24
-qDEB_HOST_MULTIARCH)/mandos/plugin-helpers \
25
/usr/lib/$(dpkg-architecture -qDEB_HOST_MULTIARCH \
26
)/mandos/plugins.d/mandos-client \
39
/usr/lib/mandos/plugins.d/mandos-client \
27
40
--pubkey=/etc/keys/mandos/pubkey.txt \
28
--seckey=/etc/keys/mandos/seckey.txt \
29
--tls-privkey=/etc/keys/mandos/tls-privkey.pem \
30
--tls-pubkey=/etc/keys/mandos/tls-pubkey.pem; echo
41
--seckey=/etc/keys/mandos/seckey.txt; echo
32
43
This command should retrieve the password from the server, decrypt
33
44
it, and output it to standard output. There it can be verified to
34
45
be the correct password, before rebooting.
38
If it ever should be necessary, the Mandos client can be temporarily
39
prevented from running at startup by passing the parameter
40
"mandos=off" to the kernel.
42
* Specifying a Client Network Interface
44
At boot time the network interfaces to use will by default be
45
automatically detected. If this should result in incorrect
46
interfaces, edit the DEVICE setting in the
47
"/etc/initramfs-tools/initramfs.conf" file. (The default setting is
48
empty, meaning it will autodetect the interfaces.) *If* the DEVICE
49
setting is changed, it will be necessary to update the initrd image
50
by running this command:
52
update-initramfs -k all -u
54
The device can also be overridden at boot time on the Linux kernel
55
command line using the sixth colon-separated field of the "ip="
56
option; for exact syntax, read the documentation in the file
57
"/usr/share/doc/linux-doc-*/Documentation/filesystems/nfs/nfsroot.txt",
58
available in the "linux-doc-*" package.
60
Note that since the network interfaces are used in the initial RAM
61
disk environment, the network interfaces *must* exist at that stage.
62
Thus, an interface can *not* be a pseudo-interface such as "br0" or
63
"tun0"; instead, only real interfaces (such as "enp1s0" or "eth0")
64
can be used. This can be overcome by writing a "network hook"
65
program to create an interface (see mandos-client(8mandos)) and
66
placing it in "/etc/mandos/network-hooks.d", from where it will be
67
copied into the initial RAM disk. Example network hook scripts can
68
be found in "/usr/share/doc/mandos-client/examples/network-hooks.d".
70
47
* User-Supplied Plugins
72
49
Any plugins found in "/etc/mandos/plugins.d" will override and add
83
60
Mandos client will be the new default way for getting a password for
84
61
the root file system when booting.
65
If it ever should be necessary, the Mandos client can be temporarily
66
prevented from running at startup by passing the parameter
67
"mandos=off" to the kernel.
86
69
* Non-local Connection (Not Using ZeroConf)
88
71
If the "ip=" kernel command line option is used to specify a
89
72
complete IP address and device name, as noted above, it then becomes
90
73
possible to specify a specific IP address and port to connect to,
91
74
instead of using ZeroConf. The syntax for doing this is
92
"mandos=connect:<IP_ADDRESS>:<PORT_NUMBER>" on the kernel command
95
For very advanced users, it is possible to specify simply
75
"mandos=connect:<IP_ADDRESS>:<PORT_NUMBER>".
77
Warning: this will cause the client to make exactly one attempt at
78
connecting, and then fail if it does not succeed.
80
For very advanced users, it it possible to specify simply
96
81
"mandos=connect" on the kernel command line to make the system only
97
82
set up the network (using the data in the "ip=" option) and not pass
98
83
any extra "--connect" options to mandos-client at boot. For this to
99
84
work, "--options-for=mandos-client:--connect=<ADDRESS>:<PORT>" needs
100
85
to be manually added to the file "/etc/mandos/plugin-runner.conf".
102
* Diffie-Hellman Parameters
104
On installation, a file with Diffie-Hellman parameters,
105
/etc/keys/mandos/dhparams.pem, will be generated and automatically
106
installed into the initital RAM disk image and also used by the
107
Mandos Client on boot. If different parameters are needed for
108
policy or other reasons, simply replace the existing dhparams.pem
109
file and update the initital RAM disk image.
111
-- Teddy Hogeborn <teddy@recompile.se>, Thu, 20 Jun 2019 20:28:25 +0200
87
-- Teddy Hogeborn <teddy@fukt.bsnet.se>, Tue, 8 Sep 2009 08:25:58 +0200
added
removed
debian/mandos-client.README.Debian
