1
* Choose the Client Network Interface
3
You MUST make sure that the correct network interface is specified
4
in the DEVICE setting in the "/etc/initramfs-tools/initramfs.conf"
5
file. *If* this is changed, it will be necessary to update the
6
initrd image by running the command
8
update-initramfs -k all -u
10
The device can be overridden at boot time on the Linux kernel
11
command line using the sixth colon-separated field of the "ip="
12
option; for exact syntax, read the documentation in the file
13
"/usr/share/doc/linux-doc-*/Documentation/filesystems/nfsroot.txt",
14
available in the "linux-doc-*" package.
16
Note that since this network interface is used in the initial RAM
17
disk environment, the network interface *must* exist at that stage.
18
Thus, the interface can *not* be a pseudo-interface such as "br0" or
19
"tun0"; instead, a real interface (such as "eth0") must be used.
21
* Adding a Client Password to the Server
23
The server must be given a password to give back to the client on
24
boot time. This password must be a one which can be used to unlock
25
the root file system device. On the *client*, run this command:
27
mandos-keygen --password
29
It will prompt for a password and output a config file section.
30
This output should be copied to the Mandos server and added to the
31
file "/etc/mandos/clients.conf" there.
33
* Testing that it Works (Without Rebooting)
35
After the server has been started with this client's key added, it
36
is possible to verify that the correct password will be received by
3
A client key has been automatically created in /etc/keys/mandos.
4
The next step is to run "mandos-keygen --password" to get a config
5
file section. This should be appended to /etc/mandos/clients.conf
8
* Use the Correct Network Interface
10
If some other network interface than "eth0" is used, it will be
11
necessary to edit /etc/mandos/plugin-runner.conf to uncomment and
12
change the line there. If this is done, it will be necessary to
13
update the initrd image by doing "update-initramfs -k all -u".
17
After the server has been started and this client's key added, it is
18
possible to verify that the correct password will be received by
37
19
this client by running the command, on the client:
39
/usr/lib/mandos/plugins.d/mandos-client \
21
# /usr/lib/mandos/plugins.d/mandos-client \
40
22
--pubkey=/etc/keys/mandos/pubkey.txt \
41
23
--seckey=/etc/keys/mandos/seckey.txt; echo
43
25
This command should retrieve the password from the server, decrypt
44
it, and output it to standard output. There it can be verified to
45
be the correct password, before rebooting.
26
it, and output it to standard output. It is now possible to verify
27
the correctness of the password before rebooting.
47
29
* User-Supplied Plugins
49
Any plugins found in "/etc/mandos/plugins.d" will override and add
50
to the normal Mandos plugins. When adding or changing plugins, do
51
not forget to update the initital RAM disk image:
53
update-initramfs -k all -u
55
* Do *NOT* Edit "/etc/crypttab"
57
It is NOT necessary to edit "/etc/crypttab" to specify
58
"/usr/lib/mandos/plugin-runner" as a keyscript for the root file
31
Any plugins found in /etc/mandos/plugins.d will override and add to
32
the normal Mandos plugins. When adding or changing plugins, do not
33
forget to update the initital RAM disk image:
35
# update-initramfs -k all -u
37
* Do *NOT* Edit /etc/crypttab
39
It is NOT necessary to edit /etc/crypttab to specify
40
/usr/lib/mandos/plugin-runner as a keyscript for the root file
59
41
system; if no keyscript is given for the root file system, the
60
42
Mandos client will be the new default way for getting a password for
61
43
the root file system when booting.
66
48
prevented from running at startup by passing the parameter
67
49
"mandos=off" to the kernel.
69
* Non-local Connection (Not Using ZeroConf)
71
If the "ip=" kernel command line option is used to specify a
72
complete IP address and device name, as noted above, it then becomes
73
possible to specify a specific IP address and port to connect to,
74
instead of using ZeroConf. The syntax for doing this is
75
"mandos=connect:<IP_ADDRESS>:<PORT_NUMBER>".
77
Warning: this will cause the client to make exactly one attempt at
78
connecting, and then fail if it does not succeed.
80
For very advanced users, it it possible to specify simply
81
"mandos=connect" on the kernel command line to make the system only
82
set up the network (using the data in the "ip=" option) and not pass
83
any extra "--connect" options to mandos-client at boot. For this to
84
work, "--options-for=mandos-client:--connect=<ADDRESS>:<PORT>" needs
85
to be manually added to the file "/etc/mandos/plugin-runner.conf".
87
-- Teddy Hogeborn <teddy@fukt.bsnet.se>, Tue, 8 Sep 2009 08:25:58 +0200
51
-- Teddy Hogeborn <teddy@fukt.bsnet.se>, Mon, 12 Jan 2009 02:29:10 +0100
added
removed
debian/mandos-client.README.Debian
