1
1
This NEWS file records noteworthy changes, very tersely.
2
2
See the manual for detailed information.
4
Version 1.8.0 (2019-02-10)
6
** Use new TLS keys for server communication and identification.
7
With GnuTLS 3.6 or later, OpenPGP keys are no longer supported.
8
The client can now use the new "raw public keys" (RFC 7250) API
9
instead, using GnuTLS 3.6.6. Please note: This *requires* new key
10
IDs to be added to server's client.conf file.
11
** New --tls-privkey and --tls-pubkey options to load TLS key files.
12
If GnuTLS is too old, these options do nothing.
14
** Supports either old or new GnuTLS.
15
The server now supports using GnuTLS 3.6.6 and clients connecting
16
with "raw public keys" as identification. The server will read
17
both fingerprints and key IDs from clients.conf file, and will use
18
either one or the other, depending on what is supported by GnuTLS
19
on the system. Please note: both are *not* supported at once; if
20
one type is supported by GnuTLS, all values of the other type from
21
clients.conf are ignored.
23
Version 1.7.20 (2018-08-19)
25
** Fix: Adapt to the Debian cryptsetup package 2.0.3 or later.
26
Important: in that version or later, the plugins "askpass-fifo",
27
"password-prompt", and "plymouth" will no longer be run, since they
28
would conflict with what cryptsetup is doing. Other plugins, such
29
as mandos-client and any user-supplied plugins, will still run.
30
** Better error message if failing to decrypt secret data
31
** Check for (and report) any key import failure from GPGME
32
** Better error message if self-signature verification fails
33
** Set system clock if not set; required by GnuPG for key import
34
** When debugging plugin-runner, it will now show starting plugins
36
Version 1.7.19 (2018-02-22)
38
** Do not print "unlink(...): No such file or directory".
39
** Bug fixes: Fix file descriptor leaks.
40
** Bug fix: Don't use leak sanitizer with leaking libraries.
42
Version 1.7.18 (2018-02-12)
44
** Bug fix: Revert faulty fix for a nonexistent bug in the
47
Version 1.7.17 (2018-02-10)
49
** Bug fix: Fix a memory leak in the plugin-runner
50
** Bug fix: Fix memory leaks in the plymouth plugin
52
Version 1.7.16 (2017-08-20)
54
** Bug fix: ignore "resumedev" entries in initramfs' cryptroot file
55
** Bug fix in plymouth plugin: fix memory leak, avoid warning output
57
Version 1.7.15 (2017-02-23)
59
** Bug fix: Respect the mandos.conf "zeroconf" and "restore" options
61
** Bug fix in mandos-keygen: Handle backslashes in passphrases
63
Version 1.7.14 (2017-01-25)
65
** Use "Requisite" instead of "RequisiteOverridable" in systemd
68
Version 1.7.13 (2016-10-08)
70
** Minor bug fix: Don't ask for passphrase or fail when generating
71
keys using GnuPG 2.1 in a chrooted environment.
73
Version 1.7.12 (2016-10-05)
75
** Bug fix: Don't crash after exit() when using DH parameters file
77
Version 1.7.11 (2016-10-01)
79
** Security fix: Don't compile with AddressSanitizer
81
** Bug fix: Find GnuTLS library when gnutls28-dev is not installed
82
** Bug fix: Include "Expires" and "Last Checker Status" in mandos-ctl
84
** New option for mandos-ctl: --dump-json
86
Version 1.7.10 (2016-06-23)
88
** Security fix: restrict permissions of /etc/mandos/plugin-helpers
90
** Bug fix: Make the --interface flag work with Python 2.7 when "cc"
93
Version 1.7.9 (2016-06-22)
95
** Do not include intro(8mandos) man page
97
Version 1.7.8 (2016-06-21)
99
** Include intro(8mandos) man page
100
** mandos-keygen: Use ECDSA SSH keys by default
101
** Bug fix: Work with GnuPG 2 when booting (Debian bug #819982)
102
by copying /usr/bin/gpg-agent into initramfs
104
** Bug fix: Work with GnuPG 2 (don't use --no-use-agent option)
105
** Bug fix: Make the --interface option work when using Python 2.7
106
by trying harder to find SO_BINDTODEVICE
108
Version 1.7.7 (2016-03-19)
110
** Fix bug in Plymouth client, broken since 1.7.2
112
Version 1.7.6 (2016-03-13)
114
** Fix bug where stopping server would time out
115
** Make server runnable with Python 3
117
Version 1.7.5 (2016-03-08)
119
** Fix security restrictions in systemd service file.
120
** Work around bug where stopping server would time out
122
Version 1.7.4 (2016-03-05)
124
** Bug fix: Tolerate errors from configure_networking (Debian Bug
126
** Compilation: Only use sanitizing options which work with the
127
compiler used when building. This should fix compilation with GCC
128
4.9 on mips, mipsel, and s390x.
130
** Add extra security restrictions in systemd service file.
132
Version 1.7.3 (2016-02-29)
134
** Bug fix: Remove new type of keyring directory user by GnuPG 2.1.
135
** Bug fix: Remove "nonnull" attribute from a function argument, which
136
would otherwise generate a spurious runtime warning.
138
Version 1.7.2 (2016-02-28)
140
** Stop using python-gnutls library; it was not updated to GnuTLS 3.3.
141
** Bug fix: Only send D-Bus signal ClientRemoved if using D-Bus.
142
** Use GnuPG 2 if available.
144
** Compile with various sanitizing flags.
146
Version 1.7.1 (2015-10-24)
148
** Bug fix: Can now really find Mandos server even if the server has
149
an IPv6 address on a network other than the one which the Mandos
152
Version 1.7.0 (2015-08-10)
154
** Bug fix: Handle local Zeroconf service name collisions better.
155
** Bug fix: Finally fix "ERROR: Child process vanished" bug.
156
** Bug fix: Fix systemd service file to start server correctly.
157
** Bug fix: Be compatible with old 2048-bit DSA keys.
158
** The D-Bus API now provides the standard D-Bus ObjectManager
159
interface, and deprecates older functionality. See the DBUS-API
160
file for the currently recommended API. Note: the original API
161
still works, but is deprecated.
163
** Can now find Mandos server even if the server has an IPv6 address
164
on a network without IPv6 Router Advertisment (like if the Mandos
165
client itself is the router, or there is an IPv6 router advertising
166
a network other than the one which the Mandos server is on.)
167
** Use a better value than 1024 for the default number of DH bits.
168
This better value is either provided by a DH parameters file (see
169
below) or an appropriate number of DH bits is determined based on
171
** Bug fix: mandos-keygen now generates correct output for the
172
"Checker" variable even if the SSH server on the Mandos client has
173
multiple SSH key types.
174
** Can now use pre-generated Diffie-Hellman parameters from a file.
176
Version 1.6.9 (2014-10-05)
178
** Changed to emit standard D-Bus signal when D-Bus properties change.
179
(The old signal is still emitted too, but marked as deprecated.)
181
Version 1.6.8 (2014-08-06)
183
** Bug fix: mandos-keygen now generates working SSH checker commands.
185
** Bug fix: "mandos-monitor" now really redraws screen on Ctrl-L.
186
** Now requires Python 2.7.
188
Version 1.6.7 (2014-07-17)
190
** Bug fix: Now compatible with GPGME 1.5.0.
191
** Bug fix: Fixed minor memory leaks.
193
** "mandos-monitor" now has verbose logging, toggleable with "v".
195
Version 1.6.6 (2014-07-13)
197
** If client host has an SSH server, "mandos-keygen --password" now
198
outputs "checker" option which uses "ssh-keyscan"; this is more
199
secure than the default "fping" checker.
200
** Bug fix: allow "." in network hook names, to match documentation.
201
** Better error messages.
203
** New --no-zeroconf option.
204
** Bug fix: Fix --servicename option, broken since 1.6.4.
205
** Bug fix: Fix --socket option work for --socket=0.
207
Version 1.6.5 (2014-05-11)
209
** Work around bug in GnuPG <http://bugs.g10code.com/gnupg/issue1622>
210
** Give better error messages when run without sufficient privileges
211
** Only warn if workaround for Debian bug #633582 was necessary and
212
failed, not if it failed and was unnecessary.
214
Version 1.6.4 (2014-02-16)
216
** Very minor fix to self-test code.
218
Version 1.6.3 (2014-01-21)
220
** Add systemd support.
221
** For PID file, fall back to /var/run if /run does not exist.
223
** Moved files from /usr/lib/mandos to whatever the architecture
224
specifies, like /usr/lib/x86_64-linux-gnu/mandos or
227
Version 1.6.2 (2013-10-24)
229
** PID file moved from /var/run to /run.
230
** Bug fix: Handle long secrets when saving client state.
231
** Bug fix: Use more magic in the GnuTLS priority string to handle
232
both old DSA/ELG 2048-bit keys and new RSA/RSA 4096-bit keys.
234
** mandos-keygen: Bug fix: now generate RSA keys which GnuTLS can use.
235
Bug fix: Output passphrase prompts even when
236
redirecting standard output.
238
Version 1.6.1 (2013-10-13)
240
** All client options for time intervals now also take an RFC 3339
241
duration. The same for all options to mandos-ctl.
242
** Bug fix: Handle fast checkers (like ":") correctly.
243
** Bug fix: Don't print output from checkers when running in
245
** Bug fix: Do not fail when client is removed from clients.conf but
246
saved settings remain.
247
** Bug fix: mandos-monitor now displays standout (reverse video) again
248
using new version of Urwid.
249
** Bug fix: Make boolean options work from the config file again.
250
** Bug fix: Make --no-ipv6 work again.
251
** New default priority string to be slightly more compatible with
252
older versions of GnuTLS.
254
** Bug fix: Fix bashism in mandos-keygen.
255
** Default key and subkey types are now RSA and RSA, respectively.
256
Also, new default key size is 4096 bits.
258
Version 1.6.0 (2012-06-18)
260
** Takes new --foreground option
261
** Init script supports new "status" action.
263
** Now uses all interfaces by default; the --interface option can
264
still be used to restrict it, and the argument to --interface (as
265
well as the $DEVICE environment variable for the network hooks) is
266
now a comma-separated list of interfaces to use.
268
Version 1.5.5 (2012-06-01)
270
** Server takes new --socket option
272
Version 1.5.4 (2012-05-20)
274
** Bug fix: Regression fix: Make non-zero approval timeout values work.
275
** Bug fix: Regression fix: Allow changing the Timeout D-Bus property.
276
** Fall back to not bind to an interface if an invalid interface name
278
** Removed support for undocumented feature of using plain "%%s" in
279
"checker" client option.
280
** Old D-Bus interface are now marked as deprecated.
281
** mandos-monitor: Bug fix: show approval timers correctly.
282
** mandos-ctl: Show "Extended Timeout" correctly, not as milliseconds.
284
Version 1.5.3 (2012-01-15)
286
** Add D-Bus property se.recompile.Client.LastCheckerStatus and use it
289
** Fix bugs in the example "bridge" network hook.
4
291
Version 1.5.2 (2012-01-08)
6
293
** Removed D-Bus signal se.recompile.Mandos.NewRequest() added in
added
removed
NEWS
