3
A client key has been automatically created in /etc/keys/mandos.
4
The next step is to run "mandos-keygen --password" to get a config
5
file section. This should be appended to /etc/mandos/clients.conf
8
* Use the Correct Network Interface
10
If some other network interface than "eth0" is used, it will be
11
necessary to edit /etc/mandos/plugin-runner.conf to uncomment and
12
change the line there. If this is done, it will be necessary to
13
update the initrd image by doing "update-initramfs -k all -u".
17
After the server has been started and this client's key added, it is
18
possible to verify that the correct password will be received by
1
This file documents the next steps to take after installation of the
2
Debian package, and also contain some notes specific to the Debian
3
packaging which are not also in the manual.
5
* Adding a Client Password to the Server
7
The server must be given a password to give back to the client on
8
boot time. This password must be a one which can be used to unlock
9
the root file system device. On the *client*, run this command:
11
mandos-keygen --password
13
It will prompt for a password and output a config file section.
14
This output should be copied to the Mandos server and added to the
15
file "/etc/mandos/clients.conf" there.
17
* Testing that it Works (Without Rebooting)
19
After the server has been started with this client's key added, it
20
is possible to verify that the correct password will be received by
19
21
this client by running the command, on the client:
21
# /usr/lib/mandos/plugins.d/mandos-client \
23
MANDOSPLUGINHELPERDIR=/usr/lib/$(dpkg-architecture \
24
-qDEB_HOST_MULTIARCH)/mandos/plugin-helpers \
25
/usr/lib/$(dpkg-architecture -qDEB_HOST_MULTIARCH \
26
)/mandos/plugins.d/mandos-client \
22
27
--pubkey=/etc/keys/mandos/pubkey.txt \
23
--seckey=/etc/keys/mandos/seckey.txt; echo
28
--seckey=/etc/keys/mandos/seckey.txt \
29
--tls-privkey=/etc/keys/mandos/tls-privkey.pem \
30
--tls-pubkey=/etc/keys/mandos/tls-pubkey.pem; echo
25
32
This command should retrieve the password from the server, decrypt
26
it, and output it to standard output. It is now possible to verify
27
the correctness of the password before rebooting.
33
it, and output it to standard output. There it can be verified to
34
be the correct password, before rebooting.
38
If it ever should be necessary, the Mandos client can be temporarily
39
prevented from running at startup by passing the parameter
40
"mandos=off" to the kernel.
42
* Specifying a Client Network Interface
44
At boot time the network interfaces to use will by default be
45
automatically detected. If this should result in incorrect
46
interfaces, edit the DEVICE setting in the
47
"/etc/initramfs-tools/initramfs.conf" file. (The default setting is
48
empty, meaning it will autodetect the interfaces.) *If* the DEVICE
49
setting is changed, it will be necessary to update the initrd image
50
by running this command:
52
(For initramfs-tools:)
53
update-initramfs -k all -u
56
dpkg-reconfigure dracut
58
The device can also be overridden at boot time on the Linux kernel
59
command line using the sixth colon-separated field of the "ip="
60
option; for exact syntax, read the documentation in the file
61
"/usr/share/doc/linux-doc-*/Documentation/filesystems/nfs/nfsroot.txt",
62
available in the "linux-doc-*" package.
64
Note that since the network interfaces are used in the initial RAM
65
disk environment, the network interfaces *must* exist at that stage.
66
Thus, an interface can *not* be a pseudo-interface such as "br0" or
67
"tun0"; instead, only real interfaces (such as "enp1s0" or "eth0")
68
can be used. This can be overcome by writing a "network hook"
69
program to create an interface (see mandos-client(8mandos)) and
70
placing it in "/etc/mandos/network-hooks.d", from where it will be
71
copied into the initial RAM disk. Example network hook scripts can
72
be found in "/usr/share/doc/mandos-client/examples/network-hooks.d".
29
74
* User-Supplied Plugins
31
Any plugins found in /etc/mandos/plugins.d will override and add to
32
the normal Mandos plugins. When adding or changing plugins, do not
33
forget to update the initital RAM disk image:
35
# update-initramfs -k all -u
37
* Do *NOT* Edit /etc/crypttab
39
It is NOT necessary to edit /etc/crypttab to specify
40
/usr/lib/mandos/plugin-runner as a keyscript for the root file
76
Any plugins found in "/etc/mandos/plugins.d" will override and add
77
to the normal Mandos plugins. When adding or changing plugins, do
78
not forget to update the initital RAM disk image:
80
(For initramfs-tools:)
81
update-initramfs -k all -u
84
dpkg-reconfigure dracut
86
* Do *NOT* Edit "/etc/crypttab"
88
It is NOT necessary to edit "/etc/crypttab" to specify
89
"/usr/lib/mandos/plugin-runner" as a keyscript for the root file
41
90
system; if no keyscript is given for the root file system, the
42
91
Mandos client will be the new default way for getting a password for
43
92
the root file system when booting.
45
-- Teddy Hogeborn <teddy@fukt.bsnet.se>, Sun, 5 Oct 2008 19:04:26 +0200
94
* Non-local Connection (Not Using ZeroConf)
96
If the "ip=" kernel command line option is used to specify a
97
complete IP address and device name, as noted above, it then becomes
98
possible to specify a specific IP address and port to connect to,
99
instead of using ZeroConf. The syntax for doing this is
100
"mandos=connect:<IP_ADDRESS>:<PORT_NUMBER>" on the kernel command
103
For very advanced users, it is possible to specify simply
104
"mandos=connect" on the kernel command line to make the system only
105
set up the network (using the data in the "ip=" option) and not pass
106
any extra "--connect" options to mandos-client at boot. For this to
107
work, "--options-for=mandos-client:--connect=<ADDRESS>:<PORT>" needs
108
to be manually added to the file "/etc/mandos/plugin-runner.conf".
110
* Diffie-Hellman Parameters
112
On installation, a file with Diffie-Hellman parameters,
113
/etc/keys/mandos/dhparams.pem, will be generated and automatically
114
installed into the initital RAM disk image and also used by the
115
Mandos Client on boot. If different parameters are needed for
116
policy or other reasons, simply replace the existing dhparams.pem
117
file and update the initital RAM disk image.
119
-- Teddy Hogeborn <teddy@recompile.se>, Mon, 15 Jul 2019 16:47:02 +0200
added
removed
debian/mandos-client.README.Debian
