1
1
This NEWS file records noteworthy changes, very tersely.
2
2
See the manual for detailed information.
4
Version 1.8.3 (2019-02-11)
5
* No user-visible changes.
7
Version 1.8.2 (2019-02-10)
9
** In mandos-keygen, ignore failures to remove files in some cases.
11
Version 1.8.1 (2019-02-10)
13
** Only generate TLS keys using GnuTLS' certtool, of sufficient
14
version. Key generation of TLS keys will not happen until a
15
version of GnuTLS is installed with support for raw public keys.
16
** Remove any bad keys created by 1.8.0 and openssl.
18
** On installation, edit clients.conf and remove the same bad key ID
19
which was erroneously reported by all 1.8.0 clients. Also do not
20
trust this key ID in the server.
22
Version 1.8.0 (2019-02-10)
24
** Use new TLS keys for server communication and identification.
25
With GnuTLS 3.6 or later, OpenPGP keys are no longer supported.
26
The client can now use the new "raw public keys" (RFC 7250) API
27
instead, using GnuTLS 3.6.6. Please note: This *requires* new key
28
IDs to be added to server's client.conf file.
29
** New --tls-privkey and --tls-pubkey options to load TLS key files.
30
If GnuTLS is too old, these options do nothing.
32
** Supports either old or new GnuTLS.
33
The server now supports using GnuTLS 3.6.6 and clients connecting
34
with "raw public keys" as identification. The server will read
35
both fingerprints and key IDs from clients.conf file, and will use
36
either one or the other, depending on what is supported by GnuTLS
37
on the system. Please note: both are *not* supported at once; if
38
one type is supported by GnuTLS, all values of the other type from
39
clients.conf are ignored.
41
Version 1.7.20 (2018-08-19)
43
** Fix: Adapt to the Debian cryptsetup package 2.0.3 or later.
44
Important: in that version or later, the plugins "askpass-fifo",
45
"password-prompt", and "plymouth" will no longer be run, since they
46
would conflict with what cryptsetup is doing. Other plugins, such
47
as mandos-client and any user-supplied plugins, will still run.
48
** Better error message if failing to decrypt secret data
49
** Check for (and report) any key import failure from GPGME
50
** Better error message if self-signature verification fails
51
** Set system clock if not set; required by GnuPG for key import
52
** When debugging plugin-runner, it will now show starting plugins
54
Version 1.7.19 (2018-02-22)
56
** Do not print "unlink(...): No such file or directory".
57
** Bug fixes: Fix file descriptor leaks.
58
** Bug fix: Don't use leak sanitizer with leaking libraries.
60
Version 1.7.18 (2018-02-12)
62
** Bug fix: Revert faulty fix for a nonexistent bug in the
65
Version 1.7.17 (2018-02-10)
67
** Bug fix: Fix a memory leak in the plugin-runner
68
** Bug fix: Fix memory leaks in the plymouth plugin
70
Version 1.7.16 (2017-08-20)
72
** Bug fix: ignore "resumedev" entries in initramfs' cryptroot file
73
** Bug fix in plymouth plugin: fix memory leak, avoid warning output
75
Version 1.7.15 (2017-02-23)
77
** Bug fix: Respect the mandos.conf "zeroconf" and "restore" options
79
** Bug fix in mandos-keygen: Handle backslashes in passphrases
81
Version 1.7.14 (2017-01-25)
83
** Use "Requisite" instead of "RequisiteOverridable" in systemd
86
Version 1.7.13 (2016-10-08)
88
** Minor bug fix: Don't ask for passphrase or fail when generating
89
keys using GnuPG 2.1 in a chrooted environment.
91
Version 1.7.12 (2016-10-05)
93
** Bug fix: Don't crash after exit() when using DH parameters file
95
Version 1.7.11 (2016-10-01)
97
** Security fix: Don't compile with AddressSanitizer
99
** Bug fix: Find GnuTLS library when gnutls28-dev is not installed
100
** Bug fix: Include "Expires" and "Last Checker Status" in mandos-ctl
102
** New option for mandos-ctl: --dump-json
104
Version 1.7.10 (2016-06-23)
106
** Security fix: restrict permissions of /etc/mandos/plugin-helpers
108
** Bug fix: Make the --interface flag work with Python 2.7 when "cc"
111
Version 1.7.9 (2016-06-22)
113
** Do not include intro(8mandos) man page
115
Version 1.7.8 (2016-06-21)
117
** Include intro(8mandos) man page
118
** mandos-keygen: Use ECDSA SSH keys by default
119
** Bug fix: Work with GnuPG 2 when booting (Debian bug #819982)
120
by copying /usr/bin/gpg-agent into initramfs
122
** Bug fix: Work with GnuPG 2 (don't use --no-use-agent option)
123
** Bug fix: Make the --interface option work when using Python 2.7
124
by trying harder to find SO_BINDTODEVICE
126
Version 1.7.7 (2016-03-19)
128
** Fix bug in Plymouth client, broken since 1.7.2
130
Version 1.7.6 (2016-03-13)
132
** Fix bug where stopping server would time out
133
** Make server runnable with Python 3
135
Version 1.7.5 (2016-03-08)
137
** Fix security restrictions in systemd service file.
138
** Work around bug where stopping server would time out
140
Version 1.7.4 (2016-03-05)
142
** Bug fix: Tolerate errors from configure_networking (Debian Bug
144
** Compilation: Only use sanitizing options which work with the
145
compiler used when building. This should fix compilation with GCC
146
4.9 on mips, mipsel, and s390x.
148
** Add extra security restrictions in systemd service file.
150
Version 1.7.3 (2016-02-29)
152
** Bug fix: Remove new type of keyring directory user by GnuPG 2.1.
153
** Bug fix: Remove "nonnull" attribute from a function argument, which
154
would otherwise generate a spurious runtime warning.
156
Version 1.7.2 (2016-02-28)
158
** Stop using python-gnutls library; it was not updated to GnuTLS 3.3.
159
** Bug fix: Only send D-Bus signal ClientRemoved if using D-Bus.
160
** Use GnuPG 2 if available.
162
** Compile with various sanitizing flags.
164
Version 1.7.1 (2015-10-24)
166
** Bug fix: Can now really find Mandos server even if the server has
167
an IPv6 address on a network other than the one which the Mandos
170
Version 1.7.0 (2015-08-10)
172
** Bug fix: Handle local Zeroconf service name collisions better.
173
** Bug fix: Finally fix "ERROR: Child process vanished" bug.
174
** Bug fix: Fix systemd service file to start server correctly.
175
** Bug fix: Be compatible with old 2048-bit DSA keys.
176
** The D-Bus API now provides the standard D-Bus ObjectManager
177
interface, and deprecates older functionality. See the DBUS-API
178
file for the currently recommended API. Note: the original API
179
still works, but is deprecated.
181
** Can now find Mandos server even if the server has an IPv6 address
182
on a network without IPv6 Router Advertisment (like if the Mandos
183
client itself is the router, or there is an IPv6 router advertising
184
a network other than the one which the Mandos server is on.)
185
** Use a better value than 1024 for the default number of DH bits.
186
This better value is either provided by a DH parameters file (see
187
below) or an appropriate number of DH bits is determined based on
189
** Bug fix: mandos-keygen now generates correct output for the
190
"Checker" variable even if the SSH server on the Mandos client has
191
multiple SSH key types.
192
** Can now use pre-generated Diffie-Hellman parameters from a file.
194
Version 1.6.9 (2014-10-05)
196
** Changed to emit standard D-Bus signal when D-Bus properties change.
197
(The old signal is still emitted too, but marked as deprecated.)
199
Version 1.6.8 (2014-08-06)
201
** Bug fix: mandos-keygen now generates working SSH checker commands.
203
** Bug fix: "mandos-monitor" now really redraws screen on Ctrl-L.
204
** Now requires Python 2.7.
206
Version 1.6.7 (2014-07-17)
208
** Bug fix: Now compatible with GPGME 1.5.0.
209
** Bug fix: Fixed minor memory leaks.
211
** "mandos-monitor" now has verbose logging, toggleable with "v".
213
Version 1.6.6 (2014-07-13)
215
** If client host has an SSH server, "mandos-keygen --password" now
216
outputs "checker" option which uses "ssh-keyscan"; this is more
217
secure than the default "fping" checker.
218
** Bug fix: allow "." in network hook names, to match documentation.
219
** Better error messages.
221
** New --no-zeroconf option.
222
** Bug fix: Fix --servicename option, broken since 1.6.4.
223
** Bug fix: Fix --socket option work for --socket=0.
225
Version 1.6.5 (2014-05-11)
227
** Work around bug in GnuPG <http://bugs.g10code.com/gnupg/issue1622>
228
** Give better error messages when run without sufficient privileges
229
** Only warn if workaround for Debian bug #633582 was necessary and
230
failed, not if it failed and was unnecessary.
232
Version 1.6.4 (2014-02-16)
234
** Very minor fix to self-test code.
236
Version 1.6.3 (2014-01-21)
238
** Add systemd support.
239
** For PID file, fall back to /var/run if /run does not exist.
241
** Moved files from /usr/lib/mandos to whatever the architecture
242
specifies, like /usr/lib/x86_64-linux-gnu/mandos or
245
Version 1.6.2 (2013-10-24)
247
** PID file moved from /var/run to /run.
248
** Bug fix: Handle long secrets when saving client state.
249
** Bug fix: Use more magic in the GnuTLS priority string to handle
250
both old DSA/ELG 2048-bit keys and new RSA/RSA 4096-bit keys.
252
** mandos-keygen: Bug fix: now generate RSA keys which GnuTLS can use.
253
Bug fix: Output passphrase prompts even when
254
redirecting standard output.
256
Version 1.6.1 (2013-10-13)
258
** All client options for time intervals now also take an RFC 3339
259
duration. The same for all options to mandos-ctl.
260
** Bug fix: Handle fast checkers (like ":") correctly.
261
** Bug fix: Don't print output from checkers when running in
263
** Bug fix: Do not fail when client is removed from clients.conf but
264
saved settings remain.
265
** Bug fix: mandos-monitor now displays standout (reverse video) again
266
using new version of Urwid.
267
** Bug fix: Make boolean options work from the config file again.
268
** Bug fix: Make --no-ipv6 work again.
269
** New default priority string to be slightly more compatible with
270
older versions of GnuTLS.
272
** Bug fix: Fix bashism in mandos-keygen.
273
** Default key and subkey types are now RSA and RSA, respectively.
274
Also, new default key size is 4096 bits.
276
Version 1.6.0 (2012-06-18)
278
** Takes new --foreground option
279
** Init script supports new "status" action.
281
** Now uses all interfaces by default; the --interface option can
282
still be used to restrict it, and the argument to --interface (as
283
well as the $DEVICE environment variable for the network hooks) is
284
now a comma-separated list of interfaces to use.
286
Version 1.5.5 (2012-06-01)
288
** Server takes new --socket option
290
Version 1.5.4 (2012-05-20)
292
** Bug fix: Regression fix: Make non-zero approval timeout values work.
293
** Bug fix: Regression fix: Allow changing the Timeout D-Bus property.
294
** Fall back to not bind to an interface if an invalid interface name
296
** Removed support for undocumented feature of using plain "%%s" in
297
"checker" client option.
298
** Old D-Bus interface are now marked as deprecated.
299
** mandos-monitor: Bug fix: show approval timers correctly.
300
** mandos-ctl: Show "Extended Timeout" correctly, not as milliseconds.
302
Version 1.5.3 (2012-01-15)
304
** Add D-Bus property se.recompile.Client.LastCheckerStatus and use it
307
** Fix bugs in the example "bridge" network hook.
309
Version 1.5.2 (2012-01-08)
311
** Removed D-Bus signal se.recompile.Mandos.NewRequest() added in
312
1.5.0. It was buggy and was of questionable utility.
314
Version 1.5.1 (2012-01-01)
316
** Include intro(8mandos) manual page, missing since migration from
317
README file in version 1.4.0.
319
Version 1.5.0 (2012-01-01)
321
** Network hooks. The Mandos client can now run custom scripts to take
322
up a network interface before the client is run. Three example
323
scripts are provided: "wireless", "openvpn", and "bridge".
324
To facilitate this, the client now prefers network interfaces which
325
are up (if any) over all other interfaces.
327
** Persistent state. Client state is now saved between server
329
** clients.conf file can now contain "enabled" setting for clients.
330
** Bug fix: Fix rare crash bug.
331
** Bug fix: Send corrent D-Bus type in PropertyChanged for
332
"ApprovalDelay", "ApprovalDuration", "Timeout", and
334
** mandos-ctl: Bare numbers as arguments are taken to be milliseconds.
335
** Bug fix: mandos-ctl --secret option now works.
336
** New D-Bus signal: se.recompile.Mandos.NewRequest(s).
338
Version 1.4.1 (2011-10-15)
340
** Make D-Bus properties settable again, and handle checkers
341
for disabled clients correctly.
342
* Miscellaneous fixes to "pedantic" Lintian warnings
344
Version 1.4.0 (2011-10-09)
345
* README file migrated to manual page intro(8mandos).
347
** Fixed warning about "rmdir: Directory not empty".
349
** Default values changed: timeout 5 minutes, interval 2 minutes.
350
** Clients gets an expiration extension when receiving a password,
351
controlled by new "extended_timeout" setting.
352
** New domain name: "fukt.bsnet.se" changes to "recompile.se". This
353
also affects the D-Bus bus and interface names (old names still
354
work). Users should start using the new names immediately.
355
** New D-Bus Client object properties "Expires" and "ExtendedTimeout";
356
see DBUS-API for details.
358
Version 1.3.1 (2011-07-27)
360
** Client now retries all Mandos servers periodically.
361
** Work around Debian bug #633582 - fixes "Permission denied" problem.
4
363
Version 1.3.0 (2011-03-08)
6
365
** Updated for Python 2.6.
added
removed
NEWS
