/mandos/release

To get this branch, use:
bzr branch http://bzr.recompile.se/loggerhead/mandos/release

« back to all changes in this revision

Viewing changes to Makefile

  • Committer: Teddy Hogeborn
  • Date: 2019-02-09 23:23:26 UTC
  • mto: (237.7.594 trunk)
  • mto: This revision was merged to the branch mainline in revision 370.
  • Revision ID: teddy@recompile.se-20190209232326-z1z2kzpgfixz7iaj
Add support for using raw public keys in TLS (RFC 7250)

Since GnuTLS removed support for OpenPGP keys in TLS (RFC 6091), and
no other library supports it, we have to change the protocol to use
something else.  We choose to use "raw public keys" (RFC 7250).  Since
we still use OpenPGP keys to decrypt the secret password, this means
that each client will have two keys: One OpenPGP key and one TLS
public/private key, and the key ID of the latter key is used to
identify clients instead of the fingerprint of the OpenPGP key.

Note that this code is still compatible with GnuTLS before version
3.6.0 (when OpenPGP key support was removed).  This commit merely adds
support for using raw pulic keys instead with GnuTLS 3.6.6. or later.

* DBUS-API (Signals/ClientNotFound): Change name of first parameter
                                     from "Fingerprint" to "KeyID".
  (Mandos Client Interface/Properties/KeyID): New.
* INSTALL: Document conflict with GnuTLS 3.6.0 (which removed OpenPGP
           key support) up until 3.6.6, when support for raw public
           keys was added.  Also document new dependency of client on
           "gnutls-bin" package (for certtool).
* Makefile (run-client): Depend on TLS key files, and also pass them
                         as arguments to client.
  (keydir/tls-privkey.pem, keydir/tls-pubkey.pem): New.
  (confdir/clients.conf): Add dependency on TLS public key.
  (purge-client): Add removal of TLS key files.
* clients.conf ([foo]/key_id, [bar]/key_id): New.
* debian/control (Source: mandos/Build-Depends): Also allow
                                                 libgnutls30 (>= 3.6.6)
  (Package: mandos/Depends): - '' -
  (Package: mandos/Description): Alter description to match new
                                 design.
  (Package: mandos-client/Description): - '' -
  (Package: mandos-client/Depends): Move "gnutls-bin | openssl" to
                                    here from "Recommends".
* debian/mandos-client.README.Debian: Add --tls-privkey and
                                      --tls-pubkey options to test
                                      command.
* debian/mandos-client.postinst (create_key): Renamed to "create_keys"
                                             (all callers changed),
                                             and also create TLS key.
* debian/mandos-client.postrm (purge): Also remove TLS key files.
* intro.xml (DESCRIPTION): Describe new dual-key design.
* mandos (GnuTLS): Define different functions depending on whether
                   support for raw public keys is detected.
  (Client.key_id): New attribute.
  (ClientDBus.KeyID_dbus_property): New method.
  (ProxyClient.__init__): Take new "key_id" parameter.
  (ClientHandler.handle): Use key IDs when using raw public keys and
                          use fingerprints when using OpenPGP keys.
  (ClientHandler.peer_certificate): Also handle raw public keys.
  (ClientHandler.key_id): New.
  (MandosServer.handle_ipc): Pass key ID over the pipe IPC.  Also
                             check for key ID matches when looking up
                             clients.
  (main): Default GnuTLS priority string depends on whether we are
          using raw public keys or not.  When unpickling clients, set
          key_id if not set in the pickle.
  (main/MandosDBusService.ClientNotFound): Change name of first
                                           parameter from
                                           "Fingerprint" to "KeyID".
* mandos-clients.conf.xml (OPTIONS): Document new "key_id" option.
  (OPTIONS/secret): Mention new key ID matchning.
  (EXPANSION/RUNTIME EXPANSION): Add new "key_id" option.
  (EXAMPLE): - '' -
* mandos-ctl (tablewords, main/keywords): Add new "KeyID" property.
* mandos-keygen: Create TLS key files.  New "--tls-keytype" (-T)
                 option.  Alter help text to be more clear about key
                 types.  When in password mode, also output "key_id"
                 option.
* mandos-keygen.xml (SYNOPSIS): Add new "--tls-keytype" (-T) option.
  (DESCRIPTION): Alter to match new dual-key design.
  (OVERVIEW): - '' -
  (FILES): Add TLS key files.
* mandos-options.xml (priority): Document new default priority string
                                 when using raw public keys.
* mandos.xml (NETWORK PROTOCOL): Describe new protocol using key ID.
  (BUGS): Remove issue about checking expire times of OpenPGP keys,
          since TLS public keys do not have expiration times.
  (SECURITY/CLIENT): Alter description to match new design.
  (SEE ALSO/GnuTLS): - '' -
  (SEE ALSO): Add reference to RFC 7250, and alter description of when
              RFC 6091 is used.
* overview.xml: Alter text to match new design.
* plugin-runner.xml (EXAMPLE): Add --tls-pubkey and --tls-privkey
                               options to mandos-client options.
* plugins.d/mandos-client.c: Use raw public keys when compiling with
                             supporting GnuTLS versions. Add new
                             "--tls-pubkey" and "--tls-privkey"
                             options (which do nothing if GnuTLS
                             library does not support raw public
                             keys).  Alter text throughout to reflect
                             new design.  Only generate new DH
                             parameters (based on size of OpenPGP key)
                             when using OpenPGP in TLS.  Default
                             GnuTLS priority string depends on whether
                             we are using raw public keys or not.
* plugins.d/mandos-client.xml (SYNOPSIS): Add new "--tls-privkey" (-t)
                                          and "--tls-pubkey" (-T)
                                          options.
  (DESCRIPTION): Describe new dual-key design.
  (OPTIONS): Document new "--tls-privkey" (-t) and "--tls-pubkey" (-T)
             options.
  (OPTIONS/--dh-bits): No longer necessarily depends on OpenPGP key
                       size.
  (FILES): Add default locations for TLS public and private key files.
  (EXAMPLE): Use new --tls-pubkey and --tls-privkey options.
  (SECURITY): Alter wording slightly to reflect new dual-key design.
  (SEE ALSO/GnuTLS): Alter description to match new design.
  (SEE ALSO): Add reference to RFC 7250, and alter description of when
              RFC 6091 is used.

Show diffs side-by-side

added added

removed removed

Lines of Context:
1
 
WARN=-O -Wall -Wextra -Wdouble-promotion -Wformat=2 -Winit-self \
 
1
WARN:=-O -Wall -Wextra -Wdouble-promotion -Wformat=2 -Winit-self \
2
2
        -Wmissing-include-dirs -Wswitch-default -Wswitch-enum \
3
3
        -Wunused -Wuninitialized -Wstrict-overflow=5 \
4
4
        -Wsuggest-attribute=pure -Wsuggest-attribute=const \
10
10
        -Wmissing-format-attribute -Wnormalized=nfc -Wpacked \
11
11
        -Wredundant-decls -Wnested-externs -Winline -Wvla \
12
12
        -Wvolatile-register-var -Woverlength-strings
13
 
#DEBUG=-ggdb3
 
13
#DEBUG:=-ggdb3 -fsanitize=address 
14
14
# For info about _FORTIFY_SOURCE, see feature_test_macros(7)
15
 
# and <http://gcc.gnu.org/ml/gcc-patches/2004-09/msg02055.html>.
16
 
FORTIFY=-D_FORTIFY_SOURCE=2 -fstack-protector-all -fPIC
17
 
LINK_FORTIFY_LD=-z relro -z now
18
 
LINK_FORTIFY=
 
15
# and <https://gcc.gnu.org/ml/gcc-patches/2004-09/msg02055.html>.
 
16
FORTIFY:=-D_FORTIFY_SOURCE=2 -fstack-protector-all -fPIC
 
17
# <https://developerblog.redhat.com/2014/10/16/gcc-undefined-behavior-sanitizer-ubsan/>
 
18
ALL_SANITIZE_OPTIONS:=-fsanitize=leak -fsanitize=undefined \
 
19
        -fsanitize=shift -fsanitize=integer-divide-by-zero \
 
20
        -fsanitize=unreachable -fsanitize=vla-bound -fsanitize=null \
 
21
        -fsanitize=return -fsanitize=signed-integer-overflow \
 
22
        -fsanitize=bounds -fsanitize=alignment \
 
23
        -fsanitize=object-size -fsanitize=float-divide-by-zero \
 
24
        -fsanitize=float-cast-overflow -fsanitize=nonnull-attribute \
 
25
        -fsanitize=returns-nonnull-attribute -fsanitize=bool \
 
26
        -fsanitize=enum
 
27
# Check which sanitizing options can be used
 
28
SANITIZE:=$(foreach option,$(ALL_SANITIZE_OPTIONS),$(shell \
 
29
        echo 'int main(){}' | $(CC) --language=c $(option) /dev/stdin \
 
30
        -o /dev/null >/dev/null 2>&1 && echo $(option)))
 
31
LINK_FORTIFY_LD:=-z relro -z now
 
32
LINK_FORTIFY:=
19
33
 
20
34
# If BROKEN_PIE is set, do not build with -pie
21
35
ifndef BROKEN_PIE
23
37
LINK_FORTIFY += -pie
24
38
endif
25
39
#COVERAGE=--coverage
26
 
OPTIMIZE=-Os -fno-strict-aliasing
27
 
LANGUAGE=-std=gnu11
28
 
htmldir=man
29
 
version=1.6.9
30
 
SED=sed
 
40
OPTIMIZE:=-Os -fno-strict-aliasing
 
41
LANGUAGE:=-std=gnu11
 
42
htmldir:=man
 
43
version:=1.7.20
 
44
SED:=sed
31
45
 
32
 
USER=$(firstword $(subst :, ,$(shell getent passwd _mandos || getent passwd nobody || echo 65534)))
33
 
GROUP=$(firstword $(subst :, ,$(shell getent group _mandos || getent group nobody || echo 65534)))
 
46
USER:=$(firstword $(subst :, ,$(shell getent passwd _mandos || getent passwd nobody || echo 65534)))
 
47
GROUP:=$(firstword $(subst :, ,$(shell getent group _mandos || getent group nogroup || echo 65534)))
34
48
 
35
49
## Use these settings for a traditional /usr/local install
36
 
# PREFIX=$(DESTDIR)/usr/local
37
 
# CONFDIR=$(DESTDIR)/etc/mandos
38
 
# KEYDIR=$(DESTDIR)/etc/mandos/keys
39
 
# MANDIR=$(PREFIX)/man
40
 
# INITRAMFSTOOLS=$(DESTDIR)/etc/initramfs-tools
41
 
# STATEDIR=$(DESTDIR)/var/lib/mandos
42
 
# LIBDIR=$(PREFIX)/lib
 
50
# PREFIX:=$(DESTDIR)/usr/local
 
51
# CONFDIR:=$(DESTDIR)/etc/mandos
 
52
# KEYDIR:=$(DESTDIR)/etc/mandos/keys
 
53
# MANDIR:=$(PREFIX)/man
 
54
# INITRAMFSTOOLS:=$(DESTDIR)/etc/initramfs-tools
 
55
# STATEDIR:=$(DESTDIR)/var/lib/mandos
 
56
# LIBDIR:=$(PREFIX)/lib
43
57
##
44
58
 
45
59
## These settings are for a package-type install
46
 
PREFIX=$(DESTDIR)/usr
47
 
CONFDIR=$(DESTDIR)/etc/mandos
48
 
KEYDIR=$(DESTDIR)/etc/keys/mandos
49
 
MANDIR=$(PREFIX)/share/man
50
 
INITRAMFSTOOLS=$(DESTDIR)/usr/share/initramfs-tools
51
 
STATEDIR=$(DESTDIR)/var/lib/mandos
52
 
LIBDIR=$(shell \
 
60
PREFIX:=$(DESTDIR)/usr
 
61
CONFDIR:=$(DESTDIR)/etc/mandos
 
62
KEYDIR:=$(DESTDIR)/etc/keys/mandos
 
63
MANDIR:=$(PREFIX)/share/man
 
64
INITRAMFSTOOLS:=$(DESTDIR)/usr/share/initramfs-tools
 
65
STATEDIR:=$(DESTDIR)/var/lib/mandos
 
66
LIBDIR:=$(shell \
53
67
        for d in \
54
68
        "/usr/lib/`dpkg-architecture -qDEB_HOST_MULTIARCH 2>/dev/null`" \
55
69
        "`rpm --eval='%{_libdir}' 2>/dev/null`" /usr/lib; do \
60
74
        done)
61
75
##
62
76
 
63
 
SYSTEMD=$(DESTDIR)$(shell pkg-config systemd --variable=systemdsystemunitdir)
 
77
SYSTEMD:=$(DESTDIR)$(shell pkg-config systemd --variable=systemdsystemunitdir)
 
78
TMPFILES:=$(DESTDIR)$(shell pkg-config systemd --variable=tmpfilesdir)
64
79
 
65
 
GNUTLS_CFLAGS=$(shell pkg-config --cflags-only-I gnutls)
66
 
GNUTLS_LIBS=$(shell pkg-config --libs gnutls)
67
 
AVAHI_CFLAGS=$(shell pkg-config --cflags-only-I avahi-core)
68
 
AVAHI_LIBS=$(shell pkg-config --libs avahi-core)
69
 
GPGME_CFLAGS=$(shell gpgme-config --cflags; getconf LFS_CFLAGS)
70
 
GPGME_LIBS=$(shell gpgme-config --libs; getconf LFS_LIBS; \
 
80
GNUTLS_CFLAGS:=$(shell pkg-config --cflags-only-I gnutls)
 
81
GNUTLS_LIBS:=$(shell pkg-config --libs gnutls)
 
82
AVAHI_CFLAGS:=$(shell pkg-config --cflags-only-I avahi-core)
 
83
AVAHI_LIBS:=$(shell pkg-config --libs avahi-core)
 
84
GPGME_CFLAGS:=$(shell gpgme-config --cflags; getconf LFS_CFLAGS)
 
85
GPGME_LIBS:=$(shell gpgme-config --libs; getconf LFS_LIBS; \
71
86
        getconf LFS_LDFLAGS)
72
 
LIBNL3_CFLAGS=$(shell pkg-config --cflags-only-I libnl-route-3.0)
73
 
LIBNL3_LIBS=$(shell pkg-config --libs libnl-route-3.0)
 
87
LIBNL3_CFLAGS:=$(shell pkg-config --cflags-only-I libnl-route-3.0)
 
88
LIBNL3_LIBS:=$(shell pkg-config --libs libnl-route-3.0)
74
89
 
75
90
# Do not change these two
76
 
CFLAGS+=$(WARN) $(DEBUG) $(FORTIFY) $(COVERAGE) $(OPTIMIZE) \
77
 
        $(LANGUAGE) $(GNUTLS_CFLAGS) $(AVAHI_CFLAGS) $(GPGME_CFLAGS) \
78
 
        -DVERSION='"$(version)"'
 
91
CFLAGS+=$(WARN) $(DEBUG) $(FORTIFY) $(SANITIZE) $(COVERAGE) \
 
92
        $(OPTIMIZE) $(LANGUAGE) -DVERSION='"$(version)"'
79
93
LDFLAGS+=-Xlinker --as-needed $(COVERAGE) $(LINK_FORTIFY) $(foreach flag,$(LINK_FORTIFY_LD),-Xlinker $(flag))
80
94
 
81
95
# Commands to format a DocBook <refentry> document into a manual page
102
116
        /usr/share/xml/docbook/stylesheet/nwalsh/xhtml/docbook.xsl \
103
117
        $<; $(HTMLPOST) $@)
104
118
# Fix citerefentry links
105
 
HTMLPOST=$(SED) --in-place \
 
119
HTMLPOST:=$(SED) --in-place \
106
120
        --expression='s/\(<a class="citerefentry" href="\)\("><span class="citerefentry"><span class="refentrytitle">\)\([^<]*\)\(<\/span>(\)\([^)]*\)\()<\/span><\/a>\)/\1\3.\5\2\3\4\5\6/g'
107
121
 
108
 
PLUGINS=plugins.d/password-prompt plugins.d/mandos-client \
 
122
PLUGINS:=plugins.d/password-prompt plugins.d/mandos-client \
109
123
        plugins.d/usplash plugins.d/splashy plugins.d/askpass-fifo \
110
124
        plugins.d/plymouth
111
 
PLUGIN_HELPERS=plugin-helpers/mandos-client-iprouteadddel
112
 
CPROGS=plugin-runner $(PLUGINS) $(PLUGIN_HELPERS)
113
 
PROGS=mandos mandos-keygen mandos-ctl mandos-monitor $(CPROGS)
114
 
DOCS=mandos.8 mandos-keygen.8 mandos-monitor.8 mandos-ctl.8 \
 
125
PLUGIN_HELPERS:=plugin-helpers/mandos-client-iprouteadddel
 
126
CPROGS:=plugin-runner $(PLUGINS) $(PLUGIN_HELPERS)
 
127
PROGS:=mandos mandos-keygen mandos-ctl mandos-monitor $(CPROGS)
 
128
DOCS:=mandos.8 mandos-keygen.8 mandos-monitor.8 mandos-ctl.8 \
115
129
        mandos.conf.5 mandos-clients.conf.5 plugin-runner.8mandos \
116
130
        plugins.d/mandos-client.8mandos \
117
131
        plugins.d/password-prompt.8mandos plugins.d/usplash.8mandos \
118
132
        plugins.d/splashy.8mandos plugins.d/askpass-fifo.8mandos \
119
133
        plugins.d/plymouth.8mandos intro.8mandos
120
134
 
121
 
htmldocs=$(addsuffix .xhtml,$(DOCS))
 
135
htmldocs:=$(addsuffix .xhtml,$(DOCS))
122
136
 
123
 
objects=$(addsuffix .o,$(CPROGS))
 
137
objects:=$(addsuffix .o,$(CPROGS))
124
138
 
125
139
all: $(PROGS) mandos.lsm
126
140
 
238
252
                --expression='s/\(mandos_\)[0-9.]\+\(\.orig\.tar\.gz\)/\1$(version)\2/' \
239
253
                $@)
240
254
 
 
255
# Need to add the GnuTLS, Avahi and GPGME libraries, and can't use
 
256
# -fsanitize=leak because GnuTLS and GPGME both leak memory.
241
257
plugins.d/mandos-client: plugins.d/mandos-client.c
242
 
        $(LINK.c) $^ -lrt $(GNUTLS_LIBS) $(AVAHI_LIBS) $(strip\
 
258
        $(CC) $(filter-out -fsanitize=leak,$(CFLAGS)) $(strip\
 
259
        ) $(GNUTLS_CFLAGS) $(AVAHI_CFLAGS) $(GPGME_CFLAGS) $(strip\
 
260
                ) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH) $^ $(strip\
 
261
                ) -lrt $(GNUTLS_LIBS) $(AVAHI_LIBS) $(strip\
243
262
                ) $(GPGME_LIBS) $(LOADLIBES) $(LDLIBS) -o $@
244
263
 
245
264
plugin-helpers/mandos-client-iprouteadddel: plugin-helpers/mandos-client-iprouteadddel.c
265
284
        ./mandos-ctl --check
266
285
 
267
286
# Run the client with a local config and key
268
 
run-client: all keydir/seckey.txt keydir/pubkey.txt
 
287
run-client: all keydir/seckey.txt keydir/pubkey.txt keydir/tls-privkey.pem keydir/tls-pubkey.pem
269
288
        @echo "###################################################################"
270
289
        @echo "# The following error messages are harmless and can be safely     #"
271
 
        @echo "# ignored.  The messages are caused by not running as root, but   #"
272
 
        @echo "# you should NOT run \"make run-client\" as root unless you also    #"
273
 
        @echo "# unpacked and compiled Mandos as root, which is NOT recommended. #"
 
290
        @echo "# ignored:                                                        #"
274
291
        @echo "# From plugin-runner: setgid: Operation not permitted             #"
275
292
        @echo "#                     setuid: Operation not permitted             #"
276
293
        @echo "# From askpass-fifo:  mkfifo: Permission denied                   #"
277
294
        @echo "# From mandos-client:                                             #"
278
295
        @echo "#             Failed to raise privileges: Operation not permitted #"
279
296
        @echo "#             Warning: network hook \"*\" exited with status *      #"
 
297
        @echo "#                                                                 #"
 
298
        @echo "# (The messages are caused by not running as root, but you should #"
 
299
        @echo "# NOT run \"make run-client\" as root unless you also unpacked and  #"
 
300
        @echo "# compiled Mandos as root, which is also NOT recommended.)        #"
280
301
        @echo "###################################################################"
281
302
# We set GNOME_KEYRING_CONTROL to block pam_gnome_keyring
282
303
        ./plugin-runner --plugin-dir=plugins.d \
283
304
                --plugin-helper-dir=plugin-helpers \
284
305
                --config-file=plugin-runner.conf \
285
 
                --options-for=mandos-client:--seckey=keydir/seckey.txt,--pubkey=keydir/pubkey.txt,--network-hook-dir=network-hooks.d \
 
306
                --options-for=mandos-client:--seckey=keydir/seckey.txt,--pubkey=keydir/pubkey.txt,--tls-privkey=keydir/tls-privkey.pem,--tls-pubkey=keydir/tls-pubkey.pem,--network-hook-dir=network-hooks.d \
286
307
                --env-for=mandos-client:GNOME_KEYRING_CONTROL= \
287
308
                $(CLIENTARGS)
288
309
 
289
310
# Used by run-client
290
 
keydir/seckey.txt keydir/pubkey.txt: mandos-keygen
 
311
keydir/seckey.txt keydir/pubkey.txt keydir/tls-privkey.pem keydir/tls-pubkey.pem: mandos-keygen
291
312
        install --directory keydir
292
313
        ./mandos-keygen --dir keydir --force
293
314
 
300
321
confdir/mandos.conf: mandos.conf
301
322
        install --directory confdir
302
323
        install --mode=u=rw,go=r $^ $@
303
 
confdir/clients.conf: clients.conf keydir/seckey.txt
 
324
confdir/clients.conf: clients.conf keydir/seckey.txt keydir/tls-pubkey.pem
304
325
        install --directory confdir
305
326
        install --mode=u=rw $< $@
306
327
# Add a client password
323
344
        elif install --directory --mode=u=rwx $(STATEDIR); then \
324
345
                chown -- $(USER):$(GROUP) $(STATEDIR) || :; \
325
346
        fi
 
347
        if [ "$(TMPFILES)" != "$(DESTDIR)" -a -d "$(TMPFILES)" ]; then \
 
348
                install --mode=u=rw,go=r tmpfiles.d-mandos.conf \
 
349
                        $(TMPFILES)/mandos.conf; \
 
350
        fi
326
351
        install --mode=u=rwx,go=rx mandos $(PREFIX)/sbin/mandos
327
352
        install --mode=u=rwx,go=rx --target-directory=$(PREFIX)/sbin \
328
353
                mandos-ctl
364
389
                $(LIBDIR)/mandos/plugin-helpers
365
390
        if [ "$(CONFDIR)" != "$(LIBDIR)/mandos" ]; then \
366
391
                install --mode=u=rwx \
367
 
                        --directory "$(CONFDIR)/plugins.d"; \
368
 
                install --directory "$(CONFDIR)/plugin-helpers"; \
 
392
                        --directory "$(CONFDIR)/plugins.d" \
 
393
                        "$(CONFDIR)/plugin-helpers"; \
369
394
        fi
370
395
        install --mode=u=rwx,go=rx --directory \
371
396
                "$(CONFDIR)/network-hooks.d"
372
397
        install --mode=u=rwx,go=rx \
373
398
                --target-directory=$(LIBDIR)/mandos plugin-runner
 
399
        install --mode=u=rwx,go=rx \
 
400
                --target-directory=$(LIBDIR)/mandos mandos-to-cryptroot-unlock
374
401
        install --mode=u=rwx,go=rx --target-directory=$(PREFIX)/sbin \
375
402
                mandos-keygen
376
403
        install --mode=u=rwx,go=rx \
391
418
        install --mode=u=rwxs,go=rx \
392
419
                --target-directory=$(LIBDIR)/mandos/plugins.d \
393
420
                plugins.d/plymouth
394
 
        install --mode=u=rwxs,go=rx \
 
421
        install --mode=u=rwx,go=rx \
395
422
                --target-directory=$(LIBDIR)/mandos/plugin-helpers \
396
423
                plugin-helpers/mandos-client-iprouteadddel
397
424
        install initramfs-tools-hook \
398
425
                $(INITRAMFSTOOLS)/hooks/mandos
399
 
        install --mode=u=rw,go=r initramfs-tools-hook-conf \
400
 
                $(INITRAMFSTOOLS)/conf-hooks.d/mandos
 
426
        install --mode=u=rw,go=r initramfs-tools-conf \
 
427
                $(INITRAMFSTOOLS)/conf.d/mandos-conf
401
428
        install initramfs-tools-script \
402
429
                $(INITRAMFSTOOLS)/scripts/init-premount/mandos
 
430
        install initramfs-tools-script-stop \
 
431
                $(INITRAMFSTOOLS)/scripts/local-premount/mandos
403
432
        install --mode=u=rw,go=r plugin-runner.conf $(CONFDIR)
404
433
        gzip --best --to-stdout mandos-keygen.8 \
405
434
                > $(MANDIR)/man8/mandos-keygen.8.gz
479
508
        -rmdir $(CONFDIR)
480
509
 
481
510
purge-client: uninstall-client
482
 
        -shred --remove $(KEYDIR)/seckey.txt
 
511
        -shred --remove $(KEYDIR)/seckey.txt $(KEYDIR)/tls-privkey.pem
483
512
        -rm --force $(CONFDIR)/plugin-runner.conf \
484
 
                $(KEYDIR)/pubkey.txt $(KEYDIR)/seckey.txt
 
513
                $(KEYDIR)/pubkey.txt $(KEYDIR)/seckey.txt \
 
514
                $(KEYDIR)/tls-pubkey.txt $(KEYDIR)/tls-privkey.txt
485
515
        -rmdir $(KEYDIR) $(CONFDIR)/plugins.d $(CONFDIR)