/mandos/release

To get this branch, use:
bzr branch http://bzr.recompile.se/loggerhead/mandos/release

« back to all changes in this revision

Viewing changes to Makefile

  • Committer: Teddy Hogeborn
  • Date: 2019-02-09 23:23:26 UTC
  • mto: (237.7.594 trunk)
  • mto: This revision was merged to the branch mainline in revision 370.
  • Revision ID: teddy@recompile.se-20190209232326-z1z2kzpgfixz7iaj
Add support for using raw public keys in TLS (RFC 7250)

Since GnuTLS removed support for OpenPGP keys in TLS (RFC 6091), and
no other library supports it, we have to change the protocol to use
something else.  We choose to use "raw public keys" (RFC 7250).  Since
we still use OpenPGP keys to decrypt the secret password, this means
that each client will have two keys: One OpenPGP key and one TLS
public/private key, and the key ID of the latter key is used to
identify clients instead of the fingerprint of the OpenPGP key.

Note that this code is still compatible with GnuTLS before version
3.6.0 (when OpenPGP key support was removed).  This commit merely adds
support for using raw pulic keys instead with GnuTLS 3.6.6. or later.

* DBUS-API (Signals/ClientNotFound): Change name of first parameter
                                     from "Fingerprint" to "KeyID".
  (Mandos Client Interface/Properties/KeyID): New.
* INSTALL: Document conflict with GnuTLS 3.6.0 (which removed OpenPGP
           key support) up until 3.6.6, when support for raw public
           keys was added.  Also document new dependency of client on
           "gnutls-bin" package (for certtool).
* Makefile (run-client): Depend on TLS key files, and also pass them
                         as arguments to client.
  (keydir/tls-privkey.pem, keydir/tls-pubkey.pem): New.
  (confdir/clients.conf): Add dependency on TLS public key.
  (purge-client): Add removal of TLS key files.
* clients.conf ([foo]/key_id, [bar]/key_id): New.
* debian/control (Source: mandos/Build-Depends): Also allow
                                                 libgnutls30 (>= 3.6.6)
  (Package: mandos/Depends): - '' -
  (Package: mandos/Description): Alter description to match new
                                 design.
  (Package: mandos-client/Description): - '' -
  (Package: mandos-client/Depends): Move "gnutls-bin | openssl" to
                                    here from "Recommends".
* debian/mandos-client.README.Debian: Add --tls-privkey and
                                      --tls-pubkey options to test
                                      command.
* debian/mandos-client.postinst (create_key): Renamed to "create_keys"
                                             (all callers changed),
                                             and also create TLS key.
* debian/mandos-client.postrm (purge): Also remove TLS key files.
* intro.xml (DESCRIPTION): Describe new dual-key design.
* mandos (GnuTLS): Define different functions depending on whether
                   support for raw public keys is detected.
  (Client.key_id): New attribute.
  (ClientDBus.KeyID_dbus_property): New method.
  (ProxyClient.__init__): Take new "key_id" parameter.
  (ClientHandler.handle): Use key IDs when using raw public keys and
                          use fingerprints when using OpenPGP keys.
  (ClientHandler.peer_certificate): Also handle raw public keys.
  (ClientHandler.key_id): New.
  (MandosServer.handle_ipc): Pass key ID over the pipe IPC.  Also
                             check for key ID matches when looking up
                             clients.
  (main): Default GnuTLS priority string depends on whether we are
          using raw public keys or not.  When unpickling clients, set
          key_id if not set in the pickle.
  (main/MandosDBusService.ClientNotFound): Change name of first
                                           parameter from
                                           "Fingerprint" to "KeyID".
* mandos-clients.conf.xml (OPTIONS): Document new "key_id" option.
  (OPTIONS/secret): Mention new key ID matchning.
  (EXPANSION/RUNTIME EXPANSION): Add new "key_id" option.
  (EXAMPLE): - '' -
* mandos-ctl (tablewords, main/keywords): Add new "KeyID" property.
* mandos-keygen: Create TLS key files.  New "--tls-keytype" (-T)
                 option.  Alter help text to be more clear about key
                 types.  When in password mode, also output "key_id"
                 option.
* mandos-keygen.xml (SYNOPSIS): Add new "--tls-keytype" (-T) option.
  (DESCRIPTION): Alter to match new dual-key design.
  (OVERVIEW): - '' -
  (FILES): Add TLS key files.
* mandos-options.xml (priority): Document new default priority string
                                 when using raw public keys.
* mandos.xml (NETWORK PROTOCOL): Describe new protocol using key ID.
  (BUGS): Remove issue about checking expire times of OpenPGP keys,
          since TLS public keys do not have expiration times.
  (SECURITY/CLIENT): Alter description to match new design.
  (SEE ALSO/GnuTLS): - '' -
  (SEE ALSO): Add reference to RFC 7250, and alter description of when
              RFC 6091 is used.
* overview.xml: Alter text to match new design.
* plugin-runner.xml (EXAMPLE): Add --tls-pubkey and --tls-privkey
                               options to mandos-client options.
* plugins.d/mandos-client.c: Use raw public keys when compiling with
                             supporting GnuTLS versions. Add new
                             "--tls-pubkey" and "--tls-privkey"
                             options (which do nothing if GnuTLS
                             library does not support raw public
                             keys).  Alter text throughout to reflect
                             new design.  Only generate new DH
                             parameters (based on size of OpenPGP key)
                             when using OpenPGP in TLS.  Default
                             GnuTLS priority string depends on whether
                             we are using raw public keys or not.
* plugins.d/mandos-client.xml (SYNOPSIS): Add new "--tls-privkey" (-t)
                                          and "--tls-pubkey" (-T)
                                          options.
  (DESCRIPTION): Describe new dual-key design.
  (OPTIONS): Document new "--tls-privkey" (-t) and "--tls-pubkey" (-T)
             options.
  (OPTIONS/--dh-bits): No longer necessarily depends on OpenPGP key
                       size.
  (FILES): Add default locations for TLS public and private key files.
  (EXAMPLE): Use new --tls-pubkey and --tls-privkey options.
  (SECURITY): Alter wording slightly to reflect new dual-key design.
  (SEE ALSO/GnuTLS): Alter description to match new design.
  (SEE ALSO): Add reference to RFC 7250, and alter description of when
              RFC 6091 is used.

Show diffs side-by-side

added added

removed removed

Lines of Context:
1
 
WARN=-O -Wall -Wformat=2 -Winit-self -Wmissing-include-dirs \
2
 
        -Wswitch-default -Wswitch-enum -Wunused-parameter \
3
 
        -Wstrict-aliasing=1 -Wextra -Wfloat-equal -Wundef -Wshadow \
 
1
WARN:=-O -Wall -Wextra -Wdouble-promotion -Wformat=2 -Winit-self \
 
2
        -Wmissing-include-dirs -Wswitch-default -Wswitch-enum \
 
3
        -Wunused -Wuninitialized -Wstrict-overflow=5 \
 
4
        -Wsuggest-attribute=pure -Wsuggest-attribute=const \
 
5
        -Wsuggest-attribute=noreturn -Wfloat-equal -Wundef -Wshadow \
4
6
        -Wunsafe-loop-optimizations -Wpointer-arith \
5
7
        -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings \
6
 
        -Wconversion -Wstrict-prototypes -Wold-style-definition \
7
 
        -Wpacked -Wnested-externs -Winline -Wvolatile-register-var
8
 
#       -Wunreachable-code
9
 
#DEBUG=-ggdb3
10
 
# For info about _FORTIFY_SOURCE, see
11
 
# <http://www.kernel.org/doc/man-pages/online/pages/man7/feature_test_macros.7.html>
12
 
# and <http://gcc.gnu.org/ml/gcc-patches/2004-09/msg02055.html>.
13
 
FORTIFY=-D_FORTIFY_SOURCE=2 -fstack-protector-all -fPIC
14
 
LINK_FORTIFY_LD=-z relro -z now
15
 
LINK_FORTIFY=
 
8
        -Wconversion -Wlogical-op -Waggregate-return \
 
9
        -Wstrict-prototypes -Wold-style-definition \
 
10
        -Wmissing-format-attribute -Wnormalized=nfc -Wpacked \
 
11
        -Wredundant-decls -Wnested-externs -Winline -Wvla \
 
12
        -Wvolatile-register-var -Woverlength-strings
 
13
#DEBUG:=-ggdb3 -fsanitize=address 
 
14
# For info about _FORTIFY_SOURCE, see feature_test_macros(7)
 
15
# and <https://gcc.gnu.org/ml/gcc-patches/2004-09/msg02055.html>.
 
16
FORTIFY:=-D_FORTIFY_SOURCE=2 -fstack-protector-all -fPIC
 
17
# <https://developerblog.redhat.com/2014/10/16/gcc-undefined-behavior-sanitizer-ubsan/>
 
18
ALL_SANITIZE_OPTIONS:=-fsanitize=leak -fsanitize=undefined \
 
19
        -fsanitize=shift -fsanitize=integer-divide-by-zero \
 
20
        -fsanitize=unreachable -fsanitize=vla-bound -fsanitize=null \
 
21
        -fsanitize=return -fsanitize=signed-integer-overflow \
 
22
        -fsanitize=bounds -fsanitize=alignment \
 
23
        -fsanitize=object-size -fsanitize=float-divide-by-zero \
 
24
        -fsanitize=float-cast-overflow -fsanitize=nonnull-attribute \
 
25
        -fsanitize=returns-nonnull-attribute -fsanitize=bool \
 
26
        -fsanitize=enum
 
27
# Check which sanitizing options can be used
 
28
SANITIZE:=$(foreach option,$(ALL_SANITIZE_OPTIONS),$(shell \
 
29
        echo 'int main(){}' | $(CC) --language=c $(option) /dev/stdin \
 
30
        -o /dev/null >/dev/null 2>&1 && echo $(option)))
 
31
LINK_FORTIFY_LD:=-z relro -z now
 
32
LINK_FORTIFY:=
16
33
 
17
34
# If BROKEN_PIE is set, do not build with -pie
18
35
ifndef BROKEN_PIE
20
37
LINK_FORTIFY += -pie
21
38
endif
22
39
#COVERAGE=--coverage
23
 
OPTIMIZE=-Os
24
 
LANGUAGE=-std=gnu99
25
 
htmldir=man
26
 
version=1.6.2
27
 
SED=sed
 
40
OPTIMIZE:=-Os -fno-strict-aliasing
 
41
LANGUAGE:=-std=gnu11
 
42
htmldir:=man
 
43
version:=1.7.20
 
44
SED:=sed
28
45
 
29
 
USER=$(firstword $(subst :, ,$(shell getent passwd _mandos || getent passwd nobody || echo 65534)))
30
 
GROUP=$(firstword $(subst :, ,$(shell getent group _mandos || getent group nobody || echo 65534)))
 
46
USER:=$(firstword $(subst :, ,$(shell getent passwd _mandos || getent passwd nobody || echo 65534)))
 
47
GROUP:=$(firstword $(subst :, ,$(shell getent group _mandos || getent group nogroup || echo 65534)))
31
48
 
32
49
## Use these settings for a traditional /usr/local install
33
 
# PREFIX=$(DESTDIR)/usr/local
34
 
# CONFDIR=$(DESTDIR)/etc/mandos
35
 
# KEYDIR=$(DESTDIR)/etc/mandos/keys
36
 
# MANDIR=$(PREFIX)/man
37
 
# INITRAMFSTOOLS=$(DESTDIR)/etc/initramfs-tools
38
 
# STATEDIR=$(DESTDIR)/var/lib/mandos
39
 
# LIBDIR=$(PREFIX)/lib
 
50
# PREFIX:=$(DESTDIR)/usr/local
 
51
# CONFDIR:=$(DESTDIR)/etc/mandos
 
52
# KEYDIR:=$(DESTDIR)/etc/mandos/keys
 
53
# MANDIR:=$(PREFIX)/man
 
54
# INITRAMFSTOOLS:=$(DESTDIR)/etc/initramfs-tools
 
55
# STATEDIR:=$(DESTDIR)/var/lib/mandos
 
56
# LIBDIR:=$(PREFIX)/lib
40
57
##
41
58
 
42
59
## These settings are for a package-type install
43
 
PREFIX=$(DESTDIR)/usr
44
 
CONFDIR=$(DESTDIR)/etc/mandos
45
 
KEYDIR=$(DESTDIR)/etc/keys/mandos
46
 
MANDIR=$(PREFIX)/share/man
47
 
INITRAMFSTOOLS=$(DESTDIR)/usr/share/initramfs-tools
48
 
STATEDIR=$(DESTDIR)/var/lib/mandos
49
 
LIBDIR=$(shell \
 
60
PREFIX:=$(DESTDIR)/usr
 
61
CONFDIR:=$(DESTDIR)/etc/mandos
 
62
KEYDIR:=$(DESTDIR)/etc/keys/mandos
 
63
MANDIR:=$(PREFIX)/share/man
 
64
INITRAMFSTOOLS:=$(DESTDIR)/usr/share/initramfs-tools
 
65
STATEDIR:=$(DESTDIR)/var/lib/mandos
 
66
LIBDIR:=$(shell \
50
67
        for d in \
51
68
        "/usr/lib/`dpkg-architecture -qDEB_HOST_MULTIARCH 2>/dev/null`" \
52
69
        "`rpm --eval='%{_libdir}' 2>/dev/null`" /usr/lib; do \
57
74
        done)
58
75
##
59
76
 
60
 
SYSTEMD=$(DESTDIR)$(shell pkg-config systemd --variable=systemdsystemunitdir)
 
77
SYSTEMD:=$(DESTDIR)$(shell pkg-config systemd --variable=systemdsystemunitdir)
 
78
TMPFILES:=$(DESTDIR)$(shell pkg-config systemd --variable=tmpfilesdir)
61
79
 
62
 
GNUTLS_CFLAGS=$(shell pkg-config --cflags-only-I gnutls)
63
 
GNUTLS_LIBS=$(shell pkg-config --libs gnutls)
64
 
AVAHI_CFLAGS=$(shell pkg-config --cflags-only-I avahi-core)
65
 
AVAHI_LIBS=$(shell pkg-config --libs avahi-core)
66
 
GPGME_CFLAGS=$(shell gpgme-config --cflags; getconf LFS_CFLAGS)
67
 
GPGME_LIBS=$(shell gpgme-config --libs; getconf LFS_LIBS; \
 
80
GNUTLS_CFLAGS:=$(shell pkg-config --cflags-only-I gnutls)
 
81
GNUTLS_LIBS:=$(shell pkg-config --libs gnutls)
 
82
AVAHI_CFLAGS:=$(shell pkg-config --cflags-only-I avahi-core)
 
83
AVAHI_LIBS:=$(shell pkg-config --libs avahi-core)
 
84
GPGME_CFLAGS:=$(shell gpgme-config --cflags; getconf LFS_CFLAGS)
 
85
GPGME_LIBS:=$(shell gpgme-config --libs; getconf LFS_LIBS; \
68
86
        getconf LFS_LDFLAGS)
 
87
LIBNL3_CFLAGS:=$(shell pkg-config --cflags-only-I libnl-route-3.0)
 
88
LIBNL3_LIBS:=$(shell pkg-config --libs libnl-route-3.0)
69
89
 
70
90
# Do not change these two
71
 
CFLAGS+=$(WARN) $(DEBUG) $(FORTIFY) $(COVERAGE) $(OPTIMIZE) \
72
 
        $(LANGUAGE) $(GNUTLS_CFLAGS) $(AVAHI_CFLAGS) $(GPGME_CFLAGS) \
73
 
        -DVERSION='"$(version)"'
 
91
CFLAGS+=$(WARN) $(DEBUG) $(FORTIFY) $(SANITIZE) $(COVERAGE) \
 
92
        $(OPTIMIZE) $(LANGUAGE) -DVERSION='"$(version)"'
74
93
LDFLAGS+=-Xlinker --as-needed $(COVERAGE) $(LINK_FORTIFY) $(foreach flag,$(LINK_FORTIFY_LD),-Xlinker $(flag))
75
94
 
76
95
# Commands to format a DocBook <refentry> document into a manual page
82
101
        --param man.authors.section.enabled     0 \
83
102
        /usr/share/xml/docbook/stylesheet/nwalsh/manpages/docbook.xsl \
84
103
        $(notdir $<); \
85
 
        $(MANPOST) $(notdir $@);\
86
104
        if locale --all 2>/dev/null | grep --regexp='^en_US\.utf8$$' \
87
105
        && type man 2>/dev/null; then LANG=en_US.UTF-8 MANWIDTH=80 \
88
106
        man --warnings --encoding=UTF-8 --local-file $(notdir $@); \
89
107
        fi >/dev/null)
90
 
# DocBook-to-man post-processing to fix a '\n' escape bug
91
 
MANPOST=$(SED) --in-place --expression='s,\\\\en,\\en,g;s,\\n,\\en,g'
92
108
 
93
109
DOCBOOKTOHTML=$(strip xsltproc --nonet --xinclude \
94
110
        --param make.year.ranges                1 \
100
116
        /usr/share/xml/docbook/stylesheet/nwalsh/xhtml/docbook.xsl \
101
117
        $<; $(HTMLPOST) $@)
102
118
# Fix citerefentry links
103
 
HTMLPOST=$(SED) --in-place \
 
119
HTMLPOST:=$(SED) --in-place \
104
120
        --expression='s/\(<a class="citerefentry" href="\)\("><span class="citerefentry"><span class="refentrytitle">\)\([^<]*\)\(<\/span>(\)\([^)]*\)\()<\/span><\/a>\)/\1\3.\5\2\3\4\5\6/g'
105
121
 
106
 
PLUGINS=plugins.d/password-prompt plugins.d/mandos-client \
 
122
PLUGINS:=plugins.d/password-prompt plugins.d/mandos-client \
107
123
        plugins.d/usplash plugins.d/splashy plugins.d/askpass-fifo \
108
124
        plugins.d/plymouth
109
 
CPROGS=plugin-runner $(PLUGINS)
110
 
PROGS=mandos mandos-keygen mandos-ctl mandos-monitor $(CPROGS)
111
 
DOCS=mandos.8 mandos-keygen.8 mandos-monitor.8 mandos-ctl.8 \
 
125
PLUGIN_HELPERS:=plugin-helpers/mandos-client-iprouteadddel
 
126
CPROGS:=plugin-runner $(PLUGINS) $(PLUGIN_HELPERS)
 
127
PROGS:=mandos mandos-keygen mandos-ctl mandos-monitor $(CPROGS)
 
128
DOCS:=mandos.8 mandos-keygen.8 mandos-monitor.8 mandos-ctl.8 \
112
129
        mandos.conf.5 mandos-clients.conf.5 plugin-runner.8mandos \
113
130
        plugins.d/mandos-client.8mandos \
114
131
        plugins.d/password-prompt.8mandos plugins.d/usplash.8mandos \
115
132
        plugins.d/splashy.8mandos plugins.d/askpass-fifo.8mandos \
116
133
        plugins.d/plymouth.8mandos intro.8mandos
117
134
 
118
 
htmldocs=$(addsuffix .xhtml,$(DOCS))
 
135
htmldocs:=$(addsuffix .xhtml,$(DOCS))
119
136
 
120
 
objects=$(addsuffix .o,$(CPROGS))
 
137
objects:=$(addsuffix .o,$(CPROGS))
121
138
 
122
139
all: $(PROGS) mandos.lsm
123
140
 
235
252
                --expression='s/\(mandos_\)[0-9.]\+\(\.orig\.tar\.gz\)/\1$(version)\2/' \
236
253
                $@)
237
254
 
 
255
# Need to add the GnuTLS, Avahi and GPGME libraries, and can't use
 
256
# -fsanitize=leak because GnuTLS and GPGME both leak memory.
238
257
plugins.d/mandos-client: plugins.d/mandos-client.c
239
 
        $(LINK.c) $^ -lrt $(GNUTLS_LIBS) $(AVAHI_LIBS) $(strip\
 
258
        $(CC) $(filter-out -fsanitize=leak,$(CFLAGS)) $(strip\
 
259
        ) $(GNUTLS_CFLAGS) $(AVAHI_CFLAGS) $(GPGME_CFLAGS) $(strip\
 
260
                ) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH) $^ $(strip\
 
261
                ) -lrt $(GNUTLS_LIBS) $(AVAHI_LIBS) $(strip\
240
262
                ) $(GPGME_LIBS) $(LOADLIBES) $(LDLIBS) -o $@
241
263
 
242
 
.PHONY : all doc html clean distclean run-client run-server install \
243
 
        install-server install-client uninstall uninstall-server \
244
 
        uninstall-client purge purge-server purge-client
 
264
plugin-helpers/mandos-client-iprouteadddel: plugin-helpers/mandos-client-iprouteadddel.c
 
265
        $(LINK.c) $(LIBNL3_CFLAGS) $^ $(LIBNL3_LIBS) $(strip\
 
266
                ) $(LOADLIBES) $(LDLIBS) -o $@
 
267
 
 
268
.PHONY : all doc html clean distclean mostlyclean maintainer-clean \
 
269
        check run-client run-server install install-html \
 
270
        install-server install-client-nokey install-client uninstall \
 
271
        uninstall-server uninstall-client purge purge-server \
 
272
        purge-client
245
273
 
246
274
clean:
247
275
        -rm --force $(CPROGS) $(objects) $(htmldocs) $(DOCS) core
256
284
        ./mandos-ctl --check
257
285
 
258
286
# Run the client with a local config and key
259
 
run-client: all keydir/seckey.txt keydir/pubkey.txt
 
287
run-client: all keydir/seckey.txt keydir/pubkey.txt keydir/tls-privkey.pem keydir/tls-pubkey.pem
260
288
        @echo "###################################################################"
261
289
        @echo "# The following error messages are harmless and can be safely     #"
262
 
        @echo "# ignored.  The messages are caused by not running as root, but   #"
263
 
        @echo "# you should NOT run \"make run-client\" as root unless you also    #"
264
 
        @echo "# unpacked and compiled Mandos as root, which is NOT recommended. #"
265
 
        @echo "# From plugin-runner: setuid: Operation not permitted             #"
 
290
        @echo "# ignored:                                                        #"
 
291
        @echo "# From plugin-runner: setgid: Operation not permitted             #"
 
292
        @echo "#                     setuid: Operation not permitted             #"
266
293
        @echo "# From askpass-fifo:  mkfifo: Permission denied                   #"
267
 
        @echo "# From mandos-client: setuid: Operation not permitted             #"
268
 
        @echo "#                     seteuid: Operation not permitted            #"
269
 
        @echo "#                     klogctl: Operation not permitted            #"
 
294
        @echo "# From mandos-client:                                             #"
 
295
        @echo "#             Failed to raise privileges: Operation not permitted #"
 
296
        @echo "#             Warning: network hook \"*\" exited with status *      #"
 
297
        @echo "#                                                                 #"
 
298
        @echo "# (The messages are caused by not running as root, but you should #"
 
299
        @echo "# NOT run \"make run-client\" as root unless you also unpacked and  #"
 
300
        @echo "# compiled Mandos as root, which is also NOT recommended.)        #"
270
301
        @echo "###################################################################"
 
302
# We set GNOME_KEYRING_CONTROL to block pam_gnome_keyring
271
303
        ./plugin-runner --plugin-dir=plugins.d \
 
304
                --plugin-helper-dir=plugin-helpers \
272
305
                --config-file=plugin-runner.conf \
273
 
                --options-for=mandos-client:--seckey=keydir/seckey.txt,--pubkey=keydir/pubkey.txt,--network-hook-dir=network-hooks.d \
 
306
                --options-for=mandos-client:--seckey=keydir/seckey.txt,--pubkey=keydir/pubkey.txt,--tls-privkey=keydir/tls-privkey.pem,--tls-pubkey=keydir/tls-pubkey.pem,--network-hook-dir=network-hooks.d \
 
307
                --env-for=mandos-client:GNOME_KEYRING_CONTROL= \
274
308
                $(CLIENTARGS)
275
309
 
276
310
# Used by run-client
277
 
keydir/seckey.txt keydir/pubkey.txt: mandos-keygen
 
311
keydir/seckey.txt keydir/pubkey.txt keydir/tls-privkey.pem keydir/tls-pubkey.pem: mandos-keygen
278
312
        install --directory keydir
279
313
        ./mandos-keygen --dir keydir --force
280
314
 
287
321
confdir/mandos.conf: mandos.conf
288
322
        install --directory confdir
289
323
        install --mode=u=rw,go=r $^ $@
290
 
confdir/clients.conf: clients.conf keydir/seckey.txt
 
324
confdir/clients.conf: clients.conf keydir/seckey.txt keydir/tls-pubkey.pem
291
325
        install --directory confdir
292
326
        install --mode=u=rw $< $@
293
327
# Add a client password
294
 
        ./mandos-keygen --dir keydir --password >> $@
 
328
        ./mandos-keygen --dir keydir --password --no-ssh >> $@
295
329
statedir:
296
330
        install --directory statedir
297
331
 
304
338
 
305
339
install-server: doc
306
340
        install --directory $(CONFDIR)
307
 
        install --directory --mode=u=rwx --owner=$(USER) \
308
 
                --group=$(GROUP) $(STATEDIR)
 
341
        if install --directory --mode=u=rwx --owner=$(USER) \
 
342
                --group=$(GROUP) $(STATEDIR); then \
 
343
                :; \
 
344
        elif install --directory --mode=u=rwx $(STATEDIR); then \
 
345
                chown -- $(USER):$(GROUP) $(STATEDIR) || :; \
 
346
        fi
 
347
        if [ "$(TMPFILES)" != "$(DESTDIR)" -a -d "$(TMPFILES)" ]; then \
 
348
                install --mode=u=rw,go=r tmpfiles.d-mandos.conf \
 
349
                        $(TMPFILES)/mandos.conf; \
 
350
        fi
309
351
        install --mode=u=rwx,go=rx mandos $(PREFIX)/sbin/mandos
310
352
        install --mode=u=rwx,go=rx --target-directory=$(PREFIX)/sbin \
311
353
                mandos-ctl
343
385
install-client-nokey: all doc
344
386
        install --directory $(LIBDIR)/mandos $(CONFDIR)
345
387
        install --directory --mode=u=rwx $(KEYDIR) \
346
 
                $(LIBDIR)/mandos/plugins.d
 
388
                $(LIBDIR)/mandos/plugins.d \
 
389
                $(LIBDIR)/mandos/plugin-helpers
347
390
        if [ "$(CONFDIR)" != "$(LIBDIR)/mandos" ]; then \
348
391
                install --mode=u=rwx \
349
 
                        --directory "$(CONFDIR)/plugins.d"; \
 
392
                        --directory "$(CONFDIR)/plugins.d" \
 
393
                        "$(CONFDIR)/plugin-helpers"; \
350
394
        fi
351
395
        install --mode=u=rwx,go=rx --directory \
352
396
                "$(CONFDIR)/network-hooks.d"
353
397
        install --mode=u=rwx,go=rx \
354
398
                --target-directory=$(LIBDIR)/mandos plugin-runner
 
399
        install --mode=u=rwx,go=rx \
 
400
                --target-directory=$(LIBDIR)/mandos mandos-to-cryptroot-unlock
355
401
        install --mode=u=rwx,go=rx --target-directory=$(PREFIX)/sbin \
356
402
                mandos-keygen
357
403
        install --mode=u=rwx,go=rx \
372
418
        install --mode=u=rwxs,go=rx \
373
419
                --target-directory=$(LIBDIR)/mandos/plugins.d \
374
420
                plugins.d/plymouth
 
421
        install --mode=u=rwx,go=rx \
 
422
                --target-directory=$(LIBDIR)/mandos/plugin-helpers \
 
423
                plugin-helpers/mandos-client-iprouteadddel
375
424
        install initramfs-tools-hook \
376
425
                $(INITRAMFSTOOLS)/hooks/mandos
377
 
        install --mode=u=rw,go=r initramfs-tools-hook-conf \
378
 
                $(INITRAMFSTOOLS)/conf-hooks.d/mandos
 
426
        install --mode=u=rw,go=r initramfs-tools-conf \
 
427
                $(INITRAMFSTOOLS)/conf.d/mandos-conf
379
428
        install initramfs-tools-script \
380
429
                $(INITRAMFSTOOLS)/scripts/init-premount/mandos
 
430
        install initramfs-tools-script-stop \
 
431
                $(INITRAMFSTOOLS)/scripts/local-premount/mandos
381
432
        install --mode=u=rw,go=r plugin-runner.conf $(CONFDIR)
382
433
        gzip --best --to-stdout mandos-keygen.8 \
383
434
                > $(MANDIR)/man8/mandos-keygen.8.gz
457
508
        -rmdir $(CONFDIR)
458
509
 
459
510
purge-client: uninstall-client
460
 
        -shred --remove $(KEYDIR)/seckey.txt
 
511
        -shred --remove $(KEYDIR)/seckey.txt $(KEYDIR)/tls-privkey.pem
461
512
        -rm --force $(CONFDIR)/plugin-runner.conf \
462
 
                $(KEYDIR)/pubkey.txt $(KEYDIR)/seckey.txt
 
513
                $(KEYDIR)/pubkey.txt $(KEYDIR)/seckey.txt \
 
514
                $(KEYDIR)/tls-pubkey.txt $(KEYDIR)/tls-privkey.txt
463
515
        -rmdir $(KEYDIR) $(CONFDIR)/plugins.d $(CONFDIR)