1
* Choose the Client Network Interface
3
You MUST make sure that the correct network interface is specified
4
in the DEVICE setting in the "/etc/initramfs-tools/initramfs.conf"
5
file. *If* this is changed, it will be necessary to update the
6
initrd image by running the command
8
update-initramfs -k all -u
10
The device can be overridden at boot time on the Linux kernel
11
command line using the sixth colon-separated field of the "ip="
12
option; for exact syntax, read the documentation in the file
13
"/usr/share/doc/linux-doc-*/Documentation/filesystems/nfsroot.txt",
14
available in the "linux-doc-*" package.
16
Note that since this network interface is used in the initial RAM
17
disk environment, the network interface *must* exist at that stage.
18
Thus, the interface can *not* be a pseudo-interface such as "br0" or
19
"tun0"; instead, a real interface (such as "eth0") must be used.
1
This file documents the next steps to take after installation of the
2
Debian package, and also contain some notes specific to the Debian
3
packaging which are not also in the manual.
21
5
* Adding a Client Password to the Server
36
20
is possible to verify that the correct password will be received by
37
21
this client by running the command, on the client:
39
/usr/lib/mandos/plugins.d/mandos-client \
23
MANDOSPLUGINHELPERDIR=/usr/lib/$(dpkg-architecture \
24
-qDEB_HOST_MULTIARCH)/mandos/plugin-helpers \
25
/usr/lib/$(dpkg-architecture -qDEB_HOST_MULTIARCH \
26
)/mandos/plugins.d/mandos-client \
40
27
--pubkey=/etc/keys/mandos/pubkey.txt \
41
28
--seckey=/etc/keys/mandos/seckey.txt; echo
44
31
it, and output it to standard output. There it can be verified to
45
32
be the correct password, before rebooting.
36
If it ever should be necessary, the Mandos client can be temporarily
37
prevented from running at startup by passing the parameter
38
"mandos=off" to the kernel.
40
* Specifying a Client Network Interface
42
At boot time the network interfaces to use will by default be
43
automatically detected. If this should result in incorrect
44
interfaces, edit the DEVICE setting in the
45
"/etc/initramfs-tools/initramfs.conf" file. (The default setting is
46
empty, meaning it will autodetect the interfaces.) *If* the DEVICE
47
setting is changed, it will be necessary to update the initrd image
48
by running this command:
50
update-initramfs -k all -u
52
The device can also be overridden at boot time on the Linux kernel
53
command line using the sixth colon-separated field of the "ip="
54
option; for exact syntax, read the documentation in the file
55
"/usr/share/doc/linux-doc-*/Documentation/filesystems/nfs/nfsroot.txt",
56
available in the "linux-doc-*" package.
58
Note that since the network interfaces are used in the initial RAM
59
disk environment, the network interfaces *must* exist at that stage.
60
Thus, an interface can *not* be a pseudo-interface such as "br0" or
61
"tun0"; instead, only real interfaces (such as "eth0") can be used.
62
This can be overcome by writing a "network hook" program to create
63
an interface (see mandos-client(8mandos)) and placing it in
64
"/etc/mandos/network-hooks.d", from where it will be copied into the
65
initial RAM disk. Example network hook scripts can be found in
66
"/usr/share/doc/mandos-client/examples/network-hooks.d".
47
68
* User-Supplied Plugins
49
70
Any plugins found in "/etc/mandos/plugins.d" will override and add
60
81
Mandos client will be the new default way for getting a password for
61
82
the root file system when booting.
65
If it ever should be necessary, the Mandos client can be temporarily
66
prevented from running at startup by passing the parameter
67
"mandos=off" to the kernel.
69
84
* Non-local Connection (Not Using ZeroConf)
71
86
If the "ip=" kernel command line option is used to specify a
72
87
complete IP address and device name, as noted above, it then becomes
73
88
possible to specify a specific IP address and port to connect to,
74
89
instead of using ZeroConf. The syntax for doing this is
75
"mandos=connect:<IP_ADDRESS>:<PORT_NUMBER>".
77
Warning: this will cause the client to make exactly one attempt at
78
connecting, and then fail if it does not succeed.
80
For very advanced users, it it possible to specify simply
90
"mandos=connect:<IP_ADDRESS>:<PORT_NUMBER>" on the kernel command
93
For very advanced users, it is possible to specify simply
81
94
"mandos=connect" on the kernel command line to make the system only
82
95
set up the network (using the data in the "ip=" option) and not pass
83
96
any extra "--connect" options to mandos-client at boot. For this to
84
97
work, "--options-for=mandos-client:--connect=<ADDRESS>:<PORT>" needs
85
98
to be manually added to the file "/etc/mandos/plugin-runner.conf".
87
-- Teddy Hogeborn <teddy@fukt.bsnet.se>, Tue, 8 Sep 2009 08:25:58 +0200
100
* Diffie-Hellman Parameters
102
On installation, a file with Diffie-Hellman parameters,
103
/etc/keys/mandos/dhparams.pem, will be generated and automatically
104
installed into the initital RAM disk image and also used by the
105
Mandos Client on boot. If different parameters are needed for
106
policy or other reasons, simply replace the existing dhparams.pem
107
file and update the initital RAM disk image.
109
-- Teddy Hogeborn <teddy@recompile.se>, Tue, 21 Jun 2016 21:43:49 +0200
added
removed
debian/mandos-client.README.Debian
