1
1
This NEWS file records noteworthy changes, very tersely.
2
2
See the manual for detailed information.
4
Version 1.8.1 (2019-02-10)
6
** Only generate TLS keys using GnuTLS' certtool, of sufficient
7
version. Key generation of TLS keys will not happen until a
8
version of GnuTLS is installed with support for raw public keys.
9
** Remove any bad keys created by 1.8.0 and openssl.
11
** On installation, edit clients.conf and remove the same bad key ID
12
which was erroneously reported by all 1.8.0 clients. Also do not
13
trust this key ID in the server.
15
Version 1.8.0 (2019-02-10)
17
** Use new TLS keys for server communication and identification.
18
With GnuTLS 3.6 or later, OpenPGP keys are no longer supported.
19
The client can now use the new "raw public keys" (RFC 7250) API
20
instead, using GnuTLS 3.6.6. Please note: This *requires* new key
21
IDs to be added to server's client.conf file.
22
** New --tls-privkey and --tls-pubkey options to load TLS key files.
23
If GnuTLS is too old, these options do nothing.
25
** Supports either old or new GnuTLS.
26
The server now supports using GnuTLS 3.6.6 and clients connecting
27
with "raw public keys" as identification. The server will read
28
both fingerprints and key IDs from clients.conf file, and will use
29
either one or the other, depending on what is supported by GnuTLS
30
on the system. Please note: both are *not* supported at once; if
31
one type is supported by GnuTLS, all values of the other type from
32
clients.conf are ignored.
34
Version 1.7.20 (2018-08-19)
36
** Fix: Adapt to the Debian cryptsetup package 2.0.3 or later.
37
Important: in that version or later, the plugins "askpass-fifo",
38
"password-prompt", and "plymouth" will no longer be run, since they
39
would conflict with what cryptsetup is doing. Other plugins, such
40
as mandos-client and any user-supplied plugins, will still run.
41
** Better error message if failing to decrypt secret data
42
** Check for (and report) any key import failure from GPGME
43
** Better error message if self-signature verification fails
44
** Set system clock if not set; required by GnuPG for key import
45
** When debugging plugin-runner, it will now show starting plugins
47
Version 1.7.19 (2018-02-22)
49
** Do not print "unlink(...): No such file or directory".
50
** Bug fixes: Fix file descriptor leaks.
51
** Bug fix: Don't use leak sanitizer with leaking libraries.
53
Version 1.7.18 (2018-02-12)
55
** Bug fix: Revert faulty fix for a nonexistent bug in the
58
Version 1.7.17 (2018-02-10)
60
** Bug fix: Fix a memory leak in the plugin-runner
61
** Bug fix: Fix memory leaks in the plymouth plugin
63
Version 1.7.16 (2017-08-20)
65
** Bug fix: ignore "resumedev" entries in initramfs' cryptroot file
66
** Bug fix in plymouth plugin: fix memory leak, avoid warning output
68
Version 1.7.15 (2017-02-23)
70
** Bug fix: Respect the mandos.conf "zeroconf" and "restore" options
72
** Bug fix in mandos-keygen: Handle backslashes in passphrases
74
Version 1.7.14 (2017-01-25)
76
** Use "Requisite" instead of "RequisiteOverridable" in systemd
79
Version 1.7.13 (2016-10-08)
81
** Minor bug fix: Don't ask for passphrase or fail when generating
82
keys using GnuPG 2.1 in a chrooted environment.
84
Version 1.7.12 (2016-10-05)
86
** Bug fix: Don't crash after exit() when using DH parameters file
88
Version 1.7.11 (2016-10-01)
90
** Security fix: Don't compile with AddressSanitizer
92
** Bug fix: Find GnuTLS library when gnutls28-dev is not installed
93
** Bug fix: Include "Expires" and "Last Checker Status" in mandos-ctl
95
** New option for mandos-ctl: --dump-json
97
Version 1.7.10 (2016-06-23)
99
** Security fix: restrict permissions of /etc/mandos/plugin-helpers
101
** Bug fix: Make the --interface flag work with Python 2.7 when "cc"
104
Version 1.7.9 (2016-06-22)
106
** Do not include intro(8mandos) man page
108
Version 1.7.8 (2016-06-21)
110
** Include intro(8mandos) man page
111
** mandos-keygen: Use ECDSA SSH keys by default
112
** Bug fix: Work with GnuPG 2 when booting (Debian bug #819982)
113
by copying /usr/bin/gpg-agent into initramfs
115
** Bug fix: Work with GnuPG 2 (don't use --no-use-agent option)
116
** Bug fix: Make the --interface option work when using Python 2.7
117
by trying harder to find SO_BINDTODEVICE
119
Version 1.7.7 (2016-03-19)
121
** Fix bug in Plymouth client, broken since 1.7.2
123
Version 1.7.6 (2016-03-13)
125
** Fix bug where stopping server would time out
126
** Make server runnable with Python 3
128
Version 1.7.5 (2016-03-08)
130
** Fix security restrictions in systemd service file.
131
** Work around bug where stopping server would time out
133
Version 1.7.4 (2016-03-05)
135
** Bug fix: Tolerate errors from configure_networking (Debian Bug
137
** Compilation: Only use sanitizing options which work with the
138
compiler used when building. This should fix compilation with GCC
139
4.9 on mips, mipsel, and s390x.
141
** Add extra security restrictions in systemd service file.
143
Version 1.7.3 (2016-02-29)
145
** Bug fix: Remove new type of keyring directory user by GnuPG 2.1.
146
** Bug fix: Remove "nonnull" attribute from a function argument, which
147
would otherwise generate a spurious runtime warning.
149
Version 1.7.2 (2016-02-28)
151
** Stop using python-gnutls library; it was not updated to GnuTLS 3.3.
152
** Bug fix: Only send D-Bus signal ClientRemoved if using D-Bus.
153
** Use GnuPG 2 if available.
155
** Compile with various sanitizing flags.
157
Version 1.7.1 (2015-10-24)
159
** Bug fix: Can now really find Mandos server even if the server has
160
an IPv6 address on a network other than the one which the Mandos
163
Version 1.7.0 (2015-08-10)
165
** Bug fix: Handle local Zeroconf service name collisions better.
166
** Bug fix: Finally fix "ERROR: Child process vanished" bug.
167
** Bug fix: Fix systemd service file to start server correctly.
168
** Bug fix: Be compatible with old 2048-bit DSA keys.
169
** The D-Bus API now provides the standard D-Bus ObjectManager
170
interface, and deprecates older functionality. See the DBUS-API
171
file for the currently recommended API. Note: the original API
172
still works, but is deprecated.
174
** Can now find Mandos server even if the server has an IPv6 address
175
on a network without IPv6 Router Advertisment (like if the Mandos
176
client itself is the router, or there is an IPv6 router advertising
177
a network other than the one which the Mandos server is on.)
178
** Use a better value than 1024 for the default number of DH bits.
179
This better value is either provided by a DH parameters file (see
180
below) or an appropriate number of DH bits is determined based on
182
** Bug fix: mandos-keygen now generates correct output for the
183
"Checker" variable even if the SSH server on the Mandos client has
184
multiple SSH key types.
185
** Can now use pre-generated Diffie-Hellman parameters from a file.
187
Version 1.6.9 (2014-10-05)
189
** Changed to emit standard D-Bus signal when D-Bus properties change.
190
(The old signal is still emitted too, but marked as deprecated.)
192
Version 1.6.8 (2014-08-06)
194
** Bug fix: mandos-keygen now generates working SSH checker commands.
196
** Bug fix: "mandos-monitor" now really redraws screen on Ctrl-L.
197
** Now requires Python 2.7.
199
Version 1.6.7 (2014-07-17)
201
** Bug fix: Now compatible with GPGME 1.5.0.
202
** Bug fix: Fixed minor memory leaks.
204
** "mandos-monitor" now has verbose logging, toggleable with "v".
206
Version 1.6.6 (2014-07-13)
208
** If client host has an SSH server, "mandos-keygen --password" now
209
outputs "checker" option which uses "ssh-keyscan"; this is more
210
secure than the default "fping" checker.
211
** Bug fix: allow "." in network hook names, to match documentation.
212
** Better error messages.
214
** New --no-zeroconf option.
215
** Bug fix: Fix --servicename option, broken since 1.6.4.
216
** Bug fix: Fix --socket option work for --socket=0.
218
Version 1.6.5 (2014-05-11)
220
** Work around bug in GnuPG <http://bugs.g10code.com/gnupg/issue1622>
221
** Give better error messages when run without sufficient privileges
222
** Only warn if workaround for Debian bug #633582 was necessary and
223
failed, not if it failed and was unnecessary.
225
Version 1.6.4 (2014-02-16)
227
** Very minor fix to self-test code.
229
Version 1.6.3 (2014-01-21)
231
** Add systemd support.
232
** For PID file, fall back to /var/run if /run does not exist.
234
** Moved files from /usr/lib/mandos to whatever the architecture
235
specifies, like /usr/lib/x86_64-linux-gnu/mandos or
238
Version 1.6.2 (2013-10-24)
240
** PID file moved from /var/run to /run.
241
** Bug fix: Handle long secrets when saving client state.
242
** Bug fix: Use more magic in the GnuTLS priority string to handle
243
both old DSA/ELG 2048-bit keys and new RSA/RSA 4096-bit keys.
245
** mandos-keygen: Bug fix: now generate RSA keys which GnuTLS can use.
246
Bug fix: Output passphrase prompts even when
247
redirecting standard output.
249
Version 1.6.1 (2013-10-13)
251
** All client options for time intervals now also take an RFC 3339
252
duration. The same for all options to mandos-ctl.
253
** Bug fix: Handle fast checkers (like ":") correctly.
254
** Bug fix: Don't print output from checkers when running in
256
** Bug fix: Do not fail when client is removed from clients.conf but
257
saved settings remain.
258
** Bug fix: mandos-monitor now displays standout (reverse video) again
259
using new version of Urwid.
260
** Bug fix: Make boolean options work from the config file again.
261
** Bug fix: Make --no-ipv6 work again.
262
** New default priority string to be slightly more compatible with
263
older versions of GnuTLS.
265
** Bug fix: Fix bashism in mandos-keygen.
266
** Default key and subkey types are now RSA and RSA, respectively.
267
Also, new default key size is 4096 bits.
269
Version 1.6.0 (2012-06-18)
271
** Takes new --foreground option
272
** Init script supports new "status" action.
274
** Now uses all interfaces by default; the --interface option can
275
still be used to restrict it, and the argument to --interface (as
276
well as the $DEVICE environment variable for the network hooks) is
277
now a comma-separated list of interfaces to use.
279
Version 1.5.5 (2012-06-01)
281
** Server takes new --socket option
283
Version 1.5.4 (2012-05-20)
285
** Bug fix: Regression fix: Make non-zero approval timeout values work.
286
** Bug fix: Regression fix: Allow changing the Timeout D-Bus property.
287
** Fall back to not bind to an interface if an invalid interface name
289
** Removed support for undocumented feature of using plain "%%s" in
290
"checker" client option.
291
** Old D-Bus interface are now marked as deprecated.
292
** mandos-monitor: Bug fix: show approval timers correctly.
293
** mandos-ctl: Show "Extended Timeout" correctly, not as milliseconds.
295
Version 1.5.3 (2012-01-15)
297
** Add D-Bus property se.recompile.Client.LastCheckerStatus and use it
300
** Fix bugs in the example "bridge" network hook.
302
4
Version 1.5.2 (2012-01-08)
304
6
** Removed D-Bus signal se.recompile.Mandos.NewRequest() added in
added
removed
NEWS
