/mandos/release

To get this branch, use:
bzr branch http://bzr.recompile.se/loggerhead/mandos/release

« back to all changes in this revision

Viewing changes to dracut-module/cmdline-mandos.sh

More consistent terminology: Clients are no longer "invalid" - they
are "disabled".  All code and documentation changed to reflect this.

D=Bus API change: The "properties" argument was removed from the
"ClientAdded" signal on interface "se.bsnet.fukt.Mandos".  All code in
both "mandos" and "mandos-monitor" changed to reflect this.

* mandos: Replaced "with closing(F)" with simply "with F" in all
          places where F is a file object.
  (Client.still_valid): Removed.  All callers changed to look at
                        "Client.enabled" instead.
  (dbus_service_property): Check for unsupported signatures with the
                           "byte_arrays" option.
  (DBusObjectWithProperties.Set): - '' -
  (ClientHandler.handle): Use the reverse pipe to receive the
                          "Client.enabled" attribute instead of the
                          now-removed "Client.still_valid()" method.
  (ForkingMixInWithPipe): Renamed to "ForkingMixInWithPipes" (all
                          users changed).  Now also create a reverse
                          pipe for sending data to the child process.
  (ForkingMixInWithPipes.add_pipe): Now takes two pipe fd's as
                                    arguments.  All callers changed.
  (IPv6_TCPServer.handle_ipc): Take an additional "reply_fd" argument
                               (all callers changed).  Close the reply
                               pipe when the child data pipe is
                               closed.  New "GETATTR" IPC method; will
                               pickle client attribute and send it
                               over the reply pipe FD.
  (MandosDBusService.ClientAdded): Removed "properties" argument.  All
                                   emitters changed.
* mandos-clients.conf.xml (DESCRIPTION, OPTIONS): Use
                                                  "enabled/disabled"
                                                  terminology.
* mandos-ctl: Option "--is-valid" renamed to "--is-enabled".
* mandos-monitor: Enable user locale.  Try to log exceptions.
  (MandosClientPropertyCache.__init__): Removed "properties" argument.
                                        All callers changed.
  (UserInterface.add_new_client): Remove "properties" argument.  All
                                  callers changed.  Supply "logger"
                                  argument to MandosClientWidget().
  (UserInterface.add_client): New "logger" argument.  All callers
                              changed.
* mandos.xml (BUGS, SECURITY/CLIENTS): Use "enabled/disabled"
                                       terminology.

Show diffs side-by-side

added added

removed removed

Lines of Context:
1
 
#!/bin/sh
2
 
#
3
 
# This file should be present in the root file system directory
4
 
# /usr/lib/dracut/modules.d/90mandos.  When dracut creates the
5
 
# initramfs image, dracut will run the "module-setup.sh" file in the
6
 
# same directory, which (when *not* using the "systemd" dracut module)
7
 
# will copy this file ("cmdline-mandos.sh") into the initramfs as
8
 
# "/lib/dracut/hooks/cmdline/20-cmdline-mandos.sh".
9
 
10
 
# Despite the above #!/bin/sh line and the executable flag, this file
11
 
# is not executed; this file is sourced by the /init script in the
12
 
# initramfs image created by dracut.
13
 
 
14
 
if getargbool 1 mandos && [ -e /lib/dracut-crypt-lib.sh ]; then
15
 
    cat >> /lib/dracut-crypt-lib.sh <<- "EOF"
16
 
        ask_for_password(){
17
 
            local cmd; local prompt; local tries=3
18
 
            local ply_cmd; local ply_prompt; local ply_tries=3
19
 
            local tty_cmd; local tty_prompt; local tty_tries=3
20
 
            local ret
21
 
        
22
 
            while [ $# -gt 0 ]; do
23
 
                case "$1" in
24
 
                    --cmd) ply_cmd="$2"; tty_cmd="$2"; shift;;
25
 
                    --ply-cmd) ply_cmd="$2"; shift;;
26
 
                    --tty-cmd) tty_cmd="$2"; shift;;
27
 
                    --prompt) ply_prompt="$2"; tty_prompt="$2"; shift;;
28
 
                    --ply-prompt) ply_prompt="$2"; shift;;
29
 
                    --tty-prompt) tty_prompt="$2"; shift;;
30
 
                    --tries) ply_tries="$2"; tty_tries="$2"; shift;;
31
 
                    --ply-tries) ply_tries="$2"; shift;;
32
 
                    --tty-tries) tty_tries="$2"; shift;;
33
 
                    --tty-echo-off) tty_echo_off=yes;;
34
 
                    -*) :;;
35
 
                esac
36
 
                shift
37
 
            done
38
 
            if [ -z "$ply_cmd" ]; then
39
 
                ply_cmd="$tty_cmd"
40
 
            fi
41
 
            # Extract device and luksname from $ply_cmd
42
 
            set -- $ply_cmd
43
 
            shift
44
 
            for arg in "$@"; do
45
 
                case "$arg" in
46
 
                    -*) :;;
47
 
                    *)
48
 
                        if [ -z "$device" ]; then
49
 
                            device="$arg"
50
 
                        else
51
 
                            luksname="$arg"
52
 
                            break
53
 
                        fi
54
 
                        ;;
55
 
                esac
56
 
            done
57
 
            { flock -s 9;
58
 
              if [ -z "$ply_prompt" ]; then
59
 
                  if [ -z "$tty_prompt" ]; then
60
 
                      CRYPTTAB_SOURCE="$device" cryptsource="$device" CRYPTTAB_NAME="$luksname" crypttarget="$luksname" /lib/mandos/plugin-runner --config-file=/etc/mandos/plugin-runner.conf | $ply_cmd
61
 
                  else
62
 
                      CRYPTTAB_SOURCE="$device" cryptsource="$device" CRYPTTAB_NAME="$luksname" crypttarget="$luksname" /lib/mandos/plugin-runner --options-for=password-prompt:--prompt="${tty_prompt}" --config-file=/etc/mandos/plugin-runner.conf | $ply_cmd
63
 
                  fi
64
 
              else
65
 
                  if [ -z "$tty_prompt" ]; then
66
 
                      CRYPTTAB_SOURCE="$device" cryptsource="$device" CRYPTTAB_NAME="$luksname" crypttarget="$luksname" /lib/mandos/plugin-runner --options-for=plymouth:--prompt="${ply_prompt}" --config-file=/etc/mandos/plugin-runner.conf | $ply_cmd
67
 
                  else
68
 
                      CRYPTTAB_SOURCE="$device" cryptsource="$device" CRYPTTAB_NAME="$luksname" crypttarget="$luksname" /lib/mandos/plugin-runner --options-for=password-prompt:--prompt="${tty_prompt}" --options-for=plymouth:--prompt="${ply_prompt}" --config-file=/etc/mandos/plugin-runner.conf | $ply_cmd
69
 
                  fi
70
 
              fi
71
 
            } 9>/.console_lock
72
 
        }
73
 
        EOF
74
 
fi